Key description
-
Seal Kit
-
For DNC-100 cylinders, NBR/Viton® material, temp range: -20°C to +100°C (Viton® up to +200°C).
-
Piston Rings
-
Fit 100mm bore, PTFE-coated bronze/PEEK, rated for 10 bar pressure.
-
Rod Bushing
-
Bronze alloy, self-lubricating, matches DNC-100 rod size (e.g., 50/63mm).
-
Wiper Seal
-
Polyurethane, dual-lip design, keeps out dirt, temp: -30°C to +80°C.
-
Rod Seal
-
NBR/PU, pressure-activated lips, leakage < 0.1 cm³/min at 10 bar.
-
Piston Buffer Seal
-
Two-piece (NBR + metal), shock-absorbing, friction coefficient ≤ 0.2.
-
Vent Screw with Filter
-
M8/M10 thread, sintered bronze filter (5-10μm), IP54 rated.
-
Mounting Screws
-
M10 x 30mm, grade 10.9 steel, torque: 20-25 Nm.
-
Grease Nipple
-
M10 x 1 thread, straight/90° angle, 500 bar max pressure.
-
Repair Manual
-
Step-by-step guide, multilingual, includes torque charts.
- For DNC-100 cylinders, NBR/Viton® material, temp range: -20°C to +100°C (Viton® up to +200°C).
- Fit 100mm bore, PTFE-coated bronze/PEEK, rated for 10 bar pressure.
- Bronze alloy, self-lubricating, matches DNC-100 rod size (e.g., 50/63mm).
- Polyurethane, dual-lip design, keeps out dirt, temp: -30°C to +80°C.
- NBR/PU, pressure-activated lips, leakage < 0.1 cm³/min at 10 bar.
- Two-piece (NBR + metal), shock-absorbing, friction coefficient ≤ 0.2.
- M8/M10 thread, sintered bronze filter (5-10μm), IP54 rated.
- M10 x 30mm, grade 10.9 steel, torque: 20-25 Nm.
- M10 x 1 thread, straight/90° angle, 500 bar max pressure.
- Step-by-step guide, multilingual, includes torque charts.
