CII DS11-1002

Board Mount Solid State Relay

This item is a CII solid state relay. This is a NOS, new, unused relay. It has the following specifications:

“DS11 series SSRs feature state of the art photo-voltaic optical isolation and power MOSFET output chips for ultra-reliable high speed switching of DC loads up to 2 amps, with extremely low on-resistance. Standard options include integral current overload/short circuit protection to provide protection of the relay, load and wiring; and isolated switch status or trip status. The overload feature pro- vides protection if a short or overload develops while the relay is in the on state or if the relay is turned on into a dead short. Switch status, optically isolated from the load, signals the status of the output and provides a logic “0” when the output is off and a logic “1” when the output is on. Trip status, also optically isolated from the load, provides a logic “1” if the output trips off and a logic “0” when the output is in a normal condition, on or off, and is available only in conjunction with short circuit protection.”

·      Standard options: short-circuit/overload protection, switch status and trip status

·      Optically coupled all solid state relay

·      TTL & CMOS compatible input

·      Low on-resistance power MOSFET output

·      Tested per MIL-PRF-28750D and approved to DSCC drawing 88062 with “Y” level screening

·      Model: DS11-1002 (relay with short circuit protection and switch status)

·      Solid State Relay

·      6 gold plated pins, with gold plated bottom  

·      PCB Mount

·      DSCC Drawing Number: 88062-002

·      0241A

·      Input Voltage: 3.8 to 32 VDC

·      Control Voltage: 0 to 18 V

·      Load Current: 2 A

·      On state resistance: 0.15 ohms

·      Operating temperature: -55°C to 105°C

Buyer pays actual shipping cost for USPS Ground Advantage shipping.

Thanks for Looking