

The Schrader valve is the most widespread of mountain bikes. It is also used for motor vehicles, for this reason it is also called "car valve". During the insertion of the head of the pump or the pressure gauge in the valve, a pivot that opens the valve itself is pressed, allowing the entry of the air and the measurement of the tire pressure. Hand pumps for Schrader valves therefore need a non -return valve in the pump head. An advantage of the Schrader valve is the possibility of swelling the wheel at any service station without the use of adapters.
- Model Identifier Number: VT-A29
- Sales Packaging: 1 piece in the package
- size: 29 x 3.0/3.5
- Max diameter. (mm): 622
- diameter min. (mm): 622
- Tyre Width Max. (mm): 90
- Tyre Width Min. (mm): 76
- Valve: VS/Schrader
- Valve Length (mm): 33
- Wheel size (inch): 29 "
The Schrader Valve is the Most Widespread Among Mountain Bikes. It is also used for motor vehicles, which is Why it is also called auto valve. When inserting the pump Head or the pressure Gauge Into the valve, a pin is pressed down which opens the valve itself, allewing air to enter and the tire pressure to be measured. Schrader Valve Hand Pumps Therefore Require a Non-Turn Valve in the Pump Head. An Advanda of the Schrader Valve is the possibility of inflatting the Wheel at Any Service Station Without the Use of Adapters.
- Model Identifier Number: VT-A29
- Sales Packaging: 1 piece in the package
- size: 29 x 3.0/3.5
- Max diameter. (mm): 622
- diameter min. (mm): 622
- Tire Width Max. (mm): 90
- Tire Width Min. (mm): 76
- Valve: VS/Schrader
- Valve Length (mm): 33
- Wheel size (inch): 29

