Note: Without mounting bracket, some models may need mounting bracket!
Pair (2 Bulbs Right And Left) 7" Inch Clear Sealed Beam Glass Lens Housing Headlights. This Pair Of Headlights Includes 100W Super White LED H4 Light Bulbs. These Headlights Have A Clean Custom Look But Fit Into The Stock Buckets And Plug Into The Stock Wiring Without Modification.
These Light Up 600 Percent Brighter And Whiter Than The Standard Stock Sealed Beam Incandescent Headlight Bulbs. These Will Fit Any Car Or Truck That Has 2 Round Glass Headlights That Are 7" Inches.
Features:
-Made with High Quality Glass Lenses - NOT cheap plastic!
-Housing has Removable bulb sockets for you to install the new LED bulbs!
-Direct Plug & Play design (certain vehicles will require slight modification)
-Professional Installation is highly recommended
-Warranty 5 years
-Housing has Removable bulb sockets for you to install the new LED bulbs!
-Direct Plug & Play design (certain vehicles will require slight modification)
-Professional Installation is highly recommended
-Warranty 5 years
H4 LED Bulbs Specifications
-Color: 6000K Cool White
-Power Consumption: 100 Watt/PC
-Luminosity: 10000 LM
-360 Degree Perfect Beam Angle
-H4 - Dual Beam Function (You will have HIGH AND LOW!)
-500% Brighter than Stock Halogen
-Lifespan: 50,000 Hours
-Operating Voltage: DC 9-32V
-Waterproof IP68, Shockproof
-Warranty 5 years
-Power Consumption: 100 Watt/PC
-Luminosity: 10000 LM
-360 Degree Perfect Beam Angle
-H4 - Dual Beam Function (You will have HIGH AND LOW!)
-500% Brighter than Stock Halogen
-Lifespan: 50,000 Hours
-Operating Voltage: DC 9-32V
-Waterproof IP68, Shockproof
-Warranty 5 years
Package includes:
- 2x 7 Inch Headlight Housings
- 2x H4 LED Bulbs (Hi/Lo Dual Beam)
- 2x 7 Inch Headlight Housings
- 2x H4 LED Bulbs (Hi/Lo Dual Beam)
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
NOTE:
Please contact us first before you leave a negative feedback, we will try our best to solve problem for you. Thanks.
Please contact us first before you leave a negative feedback, we will try our best to solve problem for you. Thanks.