Description:
Instructions for RF Wireless Remote
1. Power on to standby
Press this button to turn the device on or switch to standby mode. The device turns on and returns to its previous state when turned on.
2. Lighting mode
Switch from dynamic mode to lighting mode.
3/8/9. Dimmer settings shortcuts
Switch to lighting mode with 100%, 50% or 25% brightness.
4/6. Dynamic Mode Adjust
Switch from lighting mode to dynamic mode or switch between different dynamic modes.
5/7. Speed adjustment
Adjust the game speed of the dynamic modes, press SPEED+toincrease the starting value, and press SPEED- to decrease it.
10/11. Brightness adjustment (dimmer)
Adjust the brightness of the lighting mode, press BRIGHT+, to increase the brightness, and BRIGHT-, to decrease it
Functions for RF Wireless Remote:
Dimmer, Dynamic
8 Dynamic Effects
10-stage dimmer
PWM with 256 classes
Speed adjustable
Card type Remote
Ultra Slim Design
Smooth Dimmer Effect
1 to 1 Remote Paired
Automatic memory function
Installation for RF Wireless Remote:
1. Power supply
This unit accepts a DC power supply from 5 V to 24 V. The red cable should be connected to the plus cable and the black cable to the minus cable.
Please choose the correct power supply according to the LED application.
2. LED output
The red cable should be connected to the positive and the black LED cable. The maximum output current is 12A. Please reduce the load if the main unit overheats.
CAUTION: Do not close the LED output briefly, as this may cause permanent damage!
3. Remote control
Please pull out the insulated part before use. The wireless RF remote control signal can be passed through the barrier, so there is no need to aim at the main unit during operation. Do not install the main unit in closed metal to ensure proper reception of the remote control signal parts. The remote battery is type 3V CR2025. Please replace them only with a battery of the same type.
Specification:
Dynamic mode: 8 modes
Dynamic speed: 10-speed
Illuminance: 10 stages
PWM note: 256 notes
Soft dimming effect: Yes
Working voltage: DC 5 to 24V
Output current: peak 12A
Remote control mode: RF Wireless
Remote frequency: 433.92 MHz
Distance:> 15 m in the open area
Package includes:
2 x Mini Inline LED Light Controller with Dimmer
2 x RF Wireless Remote Controller R106 (＋battery )
