Note:It is not recommended to install the item on vehicle headlight with projector lens, lens lose brightness.
1.Need Canbus Decoder/ Resistor: These bulbs can work well on most vehicles. But when they cause the flickering issue or error code on your vehicle, you will need one pair of the decoder （not included）to cancel the error.
When you encounter undecoded problems, please do not open disputes or bad reviews, please contact customer service directly, we will solve the problem ASAP.
When you encounter undecoded problems, please do not open disputes or bad reviews, please contact customer service directly, we will solve the problem ASAP.
2.Warm Tips:
Some vehicles such as For Ford, For Chevy, For Dodge,For Jeep .etc they may need this decoder (not included）to solve the flicker/error code problem, you can try the decoders to fix.If you need it, you can buy it locally or contact customer service to get a discount to buy it.
Some vehicles such as For Ford, For Chevy, For Dodge,For Jeep .etc they may need this decoder (not included）to solve the flicker/error code problem, you can try the decoders to fix.If you need it, you can buy it locally or contact customer service to get a discount to buy it.
Technical Specification:
Plug Type: 9005 (High Beam) + H11 (Low Beam)
Quantity(each bulb): 2pcs* 3570 CSP chips
Luminous Flux: 11000LM/set (5500LM/bulb)
Operating Voltage: DC 12V(fit 12V vehicles)
Color Temperature: 6000K White
IP67 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight,fog light
Plug Type: 9005 (High Beam) + H11 (Low Beam)
Quantity(each bulb): 2pcs* 3570 CSP chips
Luminous Flux: 11000LM/set (5500LM/bulb)
Operating Voltage: DC 12V(fit 12V vehicles)
Color Temperature: 6000K White
IP67 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight,fog light
Advantage:
*Latest 3570 CSP chip(USA) light source, 2 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*6000K White light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
*Latest 3570 CSP chip(USA) light source, 2 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*6000K White light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp
Package Included:
4Pcs Bulbs
9005 (High Beam) + H11 (Low Beam)
4Pcs Bulbs
9005 (High Beam) + H11 (Low Beam)
(New and old packaging will be shipped randomly)