Window Regulator with Motor Rear Left Driver for Jeep Liberty KJ 2002-2007 SUV

About this item

 

  • [ENSURE THE KAX WINDOW REGULATOR FITS YOUR VEHICLE] - Make sure that the part fits your exact vehicle, please check the plug & fitment notes & filter system & description for accurate information.
  • [KAX OE REPLACEMENT WINDOW LIFT] - Location: Rear Left Driver Side. Replace Part Number: 748-569, 55360035AJ, 68059647AB.
  • [COMPATIBLE MODEL] - Fits Liberty 2002-2007.
  • [EASY TO INSTALL] - You can install this adjuster component without special tools, which only takes around 30 - 50 minutes.
  • [QUALITY CERTIFICATION] - Durability and life cycle tested to meet or exceed OEM. After through thousands of cycles in the actual door for extensive testing to ensure long-term trouble-free service life.

 

Highlights include

  •    Built to meet or exceed original equipment performance

 

  •    Simple electrical plug assembly, no wire splicing necessary

 

  •    High-quality steel and plastic compounds for greater durability

 

Your "Right Part" Checklist

 

Use the compatibility chart to identify your vehicle.

 

Visually compare the part you are replacing with our pictures.

 

Match reference numbers from the Item specifics section above.

 

Find the year,make, model, engine and trim in vehicle application to ensure.

 

Specifications:

 

Reference OE Number:748-569 55360035AJ 68059647AB

Position: Rear Left, Driver Side

Connector: 2 Pins

Power/Manual: Electric Power Window Regulator

Attachment Type: Bolt On

Material: ABS Plastic and Metal

Motor Included: Yes

Installation: Direct Replacement

Package Included: 1x Power window regulator with motor

 

Fitting for the following vehicles

 

2002-2007 Jeep Liberty Rear Left with Motor

 

Package


1x Window regulator with Motor in a box

 

Install the window regulator as follows: 

 

Part1 Disconnecting the Window from the Motor

 

1.Remove the interior door panel.   

2.Gently remove the plastic door cover. 

3.Locate the window mounting bolts.  

4.Move the window if necessary to access the bolts. 

5.Remove the bolts while a friend supports the window.  

6.Raise the window up into the door frame. 

7.Use masking tape to secure the window in place. 

 

Part2 Disconnecting the Motor and Regulator

 

8.Remove the window regulator bolts.  

9.Locate and remove the window motor mounting bolts.

10.Disconnect the motor wiring harness connector.  

11.Remove the motor and regulator through the access port. 

12. Connect the regulator to the new motor. 

 

Part3 Installing a New Power Window Motor

 

13.Slide the new motor and regulator back into place.  

14.Replace the mounting bolts. 

15.Reconnect the electrical connector.   

16.Remove the masking tape and lower the window back down. 

17.Insert the window mounting bolts.   

18.Reinstall the plastic liner and interior panel. 


Item Specifics
Brand KAX
Manufacturer Part Number 55360035AJ, 68059647AB,748-569
Type Window Regulator
Placement on Vehicle Left
Fitment Type Direct Replacement
Manufacturer Warranty 5 Years
Make Jeep
Model Liberty
Year 2002-2007
Body Style Sport Utility
Note It is ball stud style window regulator
OE/OEM Part Number 748-569

Payment

Paypal only eCheque will be held until cleared, All ship to paypal address. Appreciated for the prompt payment, Contact us if bid by mistake, system open unpaid item automatically.

Payment must be complete within 3 days from the date you purchase or after the end of auction. Items unpaid within 3 days of the auction end will be forfeited. We reserve the right of cancel the order and re-selling the items.

Shipping
DOMESTIC LOWER 48 US STATES: FREE
 
 
VERY IMPORTANT:
Double check shipping address. We are not responsible for incorrect or undeliverable addresses.
 
Please use Shipping & Payments tab on top of page for shipping details for your location.
 
 
US Territories such as GU, VI, SAIPAN will be charged the same as CANADA shipping rate. Transaction will be held until a full shipping amount received.
 
Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.
 
 
International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.
 
We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.A
Returns
Contact Us

Please leave five stars positive feedback positive comment and Five-Stars.

Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything,

communication Please!

(NO Three stars is LOW star, NO 1,2,3 stars PLEASE!

(YES Please give us Five-star!

Have Question or Problem??

Step 1: Contact seller

Step 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message . NO others please!

Select a topic:

I have a question about using my item or I want to send the seller a message(0)(YES)

YES, THIS ONE!!! We will try our best to solve online if possible, if not, will give correct return address.

I did not receive my item(2)(NO)

I need to return my item(1)(NO)

I receive an item that was not as described(1)(NO)

Request to cancel this order(1)(NO)

Step 3: Describe your question clearly; we will give you the best solution

We will help you to track the parcel all the way and give best solution for your order, please do not open case before give us a chance for communication!

1. We have always been trying to provide the best service and reliable product for every customer, However , accident may happen sometimes please contact us solve any issue before leaving a negative feedback.

2. We have a very professional and attentive customer support team. Welcome to contact us any time and any issue will be solved by our great communications.

♡Serve♡

Starter For Ford F-250 1992-1996 Ford Mustang 1992-2004 Bronco 1992-1996 3268

Features
【OE Quality】Starter manufactured under the guidelines of OE specifications and ISO Quality Standards by the professional OEM manufacturer, 100% computerized load.
【Precautions】After the engine is started, the key should be turned immediately to make the drive pinion of the starter withdraw in time to reduce unnecessary wear and tear. If there is a sound of beating teeth when starting, stop immediately, wait for the starter to stop and start again.
【High Quality Material】Starter is made of high quality material, which has good wear resistance, high temperature resistance, corrosion resistance, aging resistance, can guarantee maximum strength and durability, and long service life.
【Professional Manufacturing】Starter is manufactured in strict accordance with the original factory standards, with stable performance, excellent workmanship, strict factory quality control and testing, professional manufacturing, high performance and high reliability.
[EASY INSTALLATION]Plug and play design, no modification or drilling, quick installation. Shock, abrasion and fatigue tested to help ensure quality and durability.

Fitment For

Make Model Year
Ford Mustang 1992-2004
Ford Bronco 1992-1996
Ford E-150 Econoline 1992-2002
Ford F-150 1992-1998
Ford F-250 1992-1996
Ford Country Squire 1990-1991
Ford E-350 Econoline Club Wagon 1992-1996
Ford E-250 2003
Mercury Cougar 1989-1997
Lincoln Town Car 1990
Ford Thunderbird 1989-1997
Ford E-150 2003
Ford F-350 1992-1997
Ford E-150 Econoline Club Wagon 1992-2002
Ford LTD Crown Victoria 1990-1991
Ford E-350 Econoline 1992-1996
Ford E-250 Econoline 1992-2002
Mercury Grand Marquis 1990-1991
Mercury Colony Park 1990-1991
Lincoln Mark VII 1990-1992
Ford Econoline Super Duty 1996

Package
1*Starter
(As shown in the picture)

Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance

In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed 5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.

Attention:We strongly suggest comparing the posted picture to your faulty unit! Read and use product description to ensure you get the correct parts! Ebay compatibility is for search purpose only. Please double review our interchange/replace parts number and check listing pictures (those two are critical).

How to make your alternator last longer?
Often an alternator fails prematurely when a protective engine undercover or shield is damaged or missing. This happens because water splashing from the road gets inside the alternator and causes it to wear faster. If your engine undershield is damaged, have it replaced to keep the engine compartment clean and dry. A coolant or oil leak can also damage the alternator. Similarly, if you have to shampoo the engine compartment, the alternator must be protected from water and detergent.

Item Specifics
Brand KAC
Interchange Part Number 3268N
Number of Pieces 1
OE/OEM Part Number 3268
country_of_origin China
Manufacturer Part Number 18273N;3124N3200, 3205, 3268
UPC Does not apply
MPN Does not apply
Type Starter Motor
Voltage 12V
Tooth Pinion/Teeth 10
ROTATION CW
SPECS FOR For Ford PMGR
Design PMGR
Manufacturer Warranty 5 Years
Fitment Type Direct Replacement
Features All Items Tested for Reliability and Performance


Paypal only eCheque will be held until cleared, All ship to paypal address. Appreciated for the prompt payment, Contact us if bid by mistake, system open unpaid item automatically.

Payment must be complete within 3 days from the date you purchase or after the end of auction. Items unpaid within 3 days of the auction end will be forfeited. We reserve the right of cancel the order and re-selling the items.

DOMESTIC LOWER 48 US STATES: FREE
 
 
VERY IMPORTANT:
Double check shipping address. We are not responsible for incorrect or undeliverable addresses.
 
Please use Shipping & Payments tab on top of page for shipping details for your location.
 
 
US Territories such as GU, VI, SAIPAN will be charged the same as CANADA shipping rate. Transaction will be held until a full shipping amount received.
 
Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.
 
 
International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.
 
We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.A

Please leave five stars positive feedback positive comment and Five-Stars.

Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything,

communication Please!

(NO Three stars is LOW star, NO 1,2,3 stars PLEASE!

(YES Please give us Five-star!

Have Question or Problem??

Step 1: Contact seller

Step 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message . NO others please!

Select a topic:

I have a question about using my item or I want to send the seller a message(0)(YES)

YES, THIS ONE!!! We will try our best to solve online if possible, if not, will give correct return address.

I did not receive my item(2)(NO)

I need to return my item(1)(NO)

I receive an item that was not as described(1)(NO)

Request to cancel this order(1)(NO)

Step 3: Describe your question clearly; we will give you the best solution

We will help you to track the parcel all the way and give best solution for your order, please do not open case before give us a chance for communication!

1. We have always been trying to provide the best service and reliable product for every customer, However , accident may happen sometimes please contact us solve any issue before leaving a negative feedback.

2. We have a very professional and attentive customer support team. Welcome to contact us any time and any issue will be solved by our great communications.




DataCaciques