![]() |
![]() ![]() | ![]() ![]() | ![]() ![]() | ![]() ![]() |
![]() ![]() | ![]() ![]() | ![]() ![]() | ![]() ![]() |
About this item
Highlights include
Your "Right Part" Checklist
Use the compatibility chart to identify your vehicle.
Visually compare the part you are replacing with our pictures.
Match reference numbers from the Item specifics section above.
Find the year,make, model, engine and trim in vehicle application to ensure.
Specifications:
Reference OE Number:748-569 55360035AJ 68059647AB
Position: Rear Left, Driver Side
Connector: 2 Pins
Power/Manual: Electric Power Window Regulator
Attachment Type: Bolt On
Material: ABS Plastic and Metal
Motor Included: Yes
Installation: Direct Replacement
Package Included: 1x Power window regulator with motor
Fitting for the following vehicles
2002-2007 Jeep Liberty Rear Left with Motor
Package
1x Window regulator with Motor in a box
Install the window regulator as follows:
Part1 Disconnecting the Window from the Motor
1.Remove the interior door panel.
2.Gently remove the plastic door cover.
3.Locate the window mounting bolts.
4.Move the window if necessary to access the bolts.
5.Remove the bolts while a friend supports the window.
6.Raise the window up into the door frame.
7.Use masking tape to secure the window in place.
Part2 Disconnecting the Motor and Regulator
8.Remove the window regulator bolts.
9.Locate and remove the window motor mounting bolts.
10.Disconnect the motor wiring harness connector.
11.Remove the motor and regulator through the access port.
12. Connect the regulator to the new motor.
Part3 Installing a New Power Window Motor
13.Slide the new motor and regulator back into place.
14.Replace the mounting bolts.
15.Reconnect the electrical connector.
16.Remove the masking tape and lower the window back down.
17.Insert the window mounting bolts.
18.Reinstall the plastic liner and interior panel.
| Item Specifics | |
|---|---|
| Brand | KAX |
| Manufacturer Part Number | 55360035AJ, 68059647AB,748-569 |
| Type | Window Regulator |
| Placement on Vehicle | Left |
| Fitment Type | Direct Replacement |
| Manufacturer Warranty | 5 Years |
| Make | Jeep |
| Model | Liberty |
| Year | 2002-2007 |
| Body Style | Sport Utility |
| Note | It is ball stud style window regulator |
| OE/OEM Part Number | 748-569 |
Paypal only, eCheque will be held until cleared, All ship to paypal address. Appreciated for the prompt payment, Contact us if bid by mistake, system open unpaid item automatically.
Payment must be complete within 3 days from the date you purchase or after the end of auction. Items unpaid within 3 days of the auction end will be forfeited. We reserve the right of cancel the order and re-selling the items.


Please leave five stars positive feedback positive comment and Five-Stars.
Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything,
communication Please!
(NO)
Three stars is LOW star, NO 1,2,3 stars PLEASE!
(YES)
Please give us Five-star!
Have Question or Problem??
Step 1: Contact seller
Step 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message . NO others please!
Select a topic:
I have a question about using my item or I want to send the seller a message(0)(YES)
YES, THIS ONE!!! We will try our best to solve online if possible, if not, will give correct return address.
I did not receive my item(2)(NO)
I need to return my item(1)(NO)
I receive an item that was not as described(1)(NO)
Request to cancel this order(1)(NO)
Step 3: Describe your question clearly; we will give you the best solution
We will help you to track the parcel all the way and give best solution for your order, please do not open case before give us a chance for communication!
1. We have always been trying to provide the best service and reliable product for every customer, However , accident may happen sometimes please contact us solve any issue before leaving a negative feedback.
2. We have a very professional and attentive customer support team. Welcome to contact us any time and any issue will be solved by our great communications.

♡Serve♡ ♡Store Category♡ | Headlights Assembly Clear for 1999-2002 Chevrolet Silverado 1500 AMCH Fitment: 1999-2002 For Chevrolet Silverado 1500 For chevy Silverado 1500 Lighting Kit Specification: Condition: 100% Brand New and High Quality Quantity: A Set Professional Installation is Highly Recommended. TIPS: ①.Installation Guide: 1.Undo the screws, clips, or retainer springs that hold the headlight in place. 2.Disconnect the wiring from the assembly. 3.Detach the headlight from the vehicle to replace it with a new one. 4.Fit in the new headlight assembly. 5.Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed. 6.Reconnect the wiring that was unplugged from the assembly. 7.Put back the grille and other components that you removed. Seal them back into place. 8.Test the new assembly. ②.Adjustment Guide: Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground. 1.Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle. 2.Adjust the headlight individually.Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens. 3.Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall. 4.Test your results.
Paypal only, eCheque will be held until cleared, All ship to paypal address. Appreciated for the prompt payment, Contact us if bid by mistake, system open unpaid item automatically. Payment must be complete within 3 days from the date you purchase or after the end of auction. Items unpaid within 3 days of the auction end will be forfeited. We reserve the right of cancel the order and re-selling the items.
DOMESTIC LOWER 48 US STATES: FREE VERY IMPORTANT: Double check shipping address. We are not responsible for incorrect or undeliverable addresses. Please use Shipping & Payments tab on top of page for shipping details for your location. US Territories such as GU, VI, SAIPAN will be charged the same as CANADA shipping rate. Transaction will be held until a full shipping amount received. Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided. International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information. We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.A ![]() Please leave five stars positive feedback positive comment and Five-Stars. Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything, communication Please! (NO) (YES) Have Question or Problem?? Step 1: Contact seller Step 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message . NO others please! Select a topic:
YES, THIS ONE!!! We will try our best to solve online if possible, if not, will give correct return address.
Step 3: Describe your question clearly; we will give you the best solution We will help you to track the parcel all the way and give best solution for your order, please do not open case before give us a chance for communication! 1. We have always been trying to provide the best service and reliable product for every customer, However , accident may happen sometimes please contact us solve any issue before leaving a negative feedback. 2. We have a very professional and attentive customer support team. Welcome to contact us any time and any issue will be solved by our great communications. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||