Instructions:
1. Park on a level surface, engage the handbrake, and let the wheels cool.
2. Remove the wheel (loosen lug nuts, jack up the car).
3. Wash with soap and water, then wipe with alcohol for best adhesive bond.
4. Place the covers over your calipers to check the fit.
5. Add a generous bead High Temperature Resistant Silicone where the cover contacts the caliper. Follow curing time instructions.
6. Press covers firmly; use tape or clamps if necessary until cured.
7. Allow the adhesive to cure fully (usually a few hours to 24 hrs).
8. Tighten lug nuts securely in a star pattern.
9. Ensure covers are firmly attached and test brakes at low speed.