Z6 Series 9007/HB5/9004 Bulbs Replace halogen

Note:Our bulbs only replace halogen headlamps.Can not replace the HID headlamps. Please double check before order.

500% Brighter than Halogen: 60W 6000K cool white, with clear visibility and perfect beam pattern, so you can enjoy good vision while driving at night.

◆Super Focused Beam Pattern:A1plus bulbs with 1.0mm ultra-thin centered light emitting. No dark spots or foggy light, do not blind oncoming traffic.
◆5mins Easy Installation: The bulb’s almost 1:1 design as halogen. Plug and play. No other tools are needed
◆360° Adjustable Beam Pattern: Adopts 360° adjustable locker ring to ensure the best beam pattern. except H1, H3, 880, PSX26W model
◆50,000 hours Lifespan: A1 plus comes with a copper base board, cold pressed aluminum heat sink and 12,000rmp cooling fan. Better solve the dimming or over heated of bulbs.
◆Canbus Decoder/ Resistor: These A1 plus series bulbs can work well on most vehicles.

Item Specifics:
Model: Z6 plus Series 9007/9004/HB5
Fitment Type: Direct Replacement
Voltage: DC 9-32V
Power: 60W/per bulb
Luminous Flux: 12000LM/per pair
Color Temperature: 6000K
Lamp beads: 3570 CSP
Chips: customized chips
Drivers: Built-in Drivers
Lifespan: Over 50,000 hours
Decoding: Built-in decoding
Waterproof Rate: IP67 Water and Dust Seal, CE, RoHS
Operating Temperature: -40℃ ~ +150℃
Warranty: 5 year warranty
 

Two-way heat dissipation channel:

1.All-in-one aluminum profile as heat conduction system, 360-degree heat radiating

2.High speed mute fan(12000R/Min), high Air flow for faster cooling rate

 

Package Include:
2 x 9007/HB5 Headlights Bulbs
(Random delivery of new and old packaging in the box)
 

Install Caution:

1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.

2. Put the vehicle into park or make sure it is securely in gear.

3. Be sure to turn off the ignition and remove the key.

4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.

5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.

6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.

7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

DataCaciques