





Transmission Type:2.4GHz
Poplar Pattern:Omnidirectional
Frequency Response:20Hz-16kHz
Signal-to-noise Ratio:80dB
Sensitivity:-42dB
Operating Range:50m (without obstacles
RF Output Power:6dBm
Charging Port:USB-C
Transmitter's Battery Capacity:95mAh
Transmitter's Charging Time:Approx. 2 hours
Transmitter's Battery Life:Approx.9 hours
Receiver's Power Requirement:Supplied by External Devices
BY-V1-TX/ BY-V2-TX: 9.5g
BY-V1-RX/ BY-V2-RX: 6g
BY-V10-RX/ BY-V20-RX: 6g
BY-V1-TX/ BY-V2-TX: 52.22×25.23×19.75mm
BY-V1-RX/ BY-V2-RX: 43.92×23.5×9.3mm
BY-V10-RX/ BY-V20-RX: 43.92×24.7×9.3mm
How to use
For the kit of BY-V1/ BY-V10
1.Press and hold the power button for 2 seconds to turn on the
BY-V1-TX transmitter.
2. Plug the BY-V1-RX into an iOS Lightning device or the BY-V10-RX into
a USB-C device.
3. Transmitter and receiver will be suCCessfully paired within 10
seconds
4. You are ready to record
For the kit of BY-V2/ BY-V20
1.Press and hold the power button for 2 seconds to turn on two
BY-V2-TX transmitters
2. Plug the BY-V2-RX into an iOS Lightning device or the BY-V20-RX into
a USB-C device.
3.Transmitters and receiver will be successfully paired within 10
seconds
4. You are ready to record

BY-V1
BY-V1-TXTransmitter x1
BY-V1-RX Receiver X
USB-C Charging Cable ×
Foam Windscreen ×1
BY-V2
BY-V2-TXTransmitter X2
BY-V2-RX Receiver x1
USB-C Charging Cable X2
Foam Windscreen ×2
BY-V10
BY-V1-TXTransmitter x1
BY-V10-RX Receiver ×
USB-C Charging Cable ×1
Foam Windscreen ×1
BY-V20
BY-V2-TX Transmitter ×2
BY-V20-RX Receiver x1
USB-C Charging Cable ×2
Foam Windscreen ×2




