Note:
1. This kit is for vehicles with Factory Halogen Systems, it will not work with vehicles with Factory HID.Pls confirm the item if it can matches your car before you purchase.
2.This lisiting do not included bulb holders, some of the car need add bulb holder to get the LED bulbs replace the halogen bulbs
3. If there is an error on the onboard computer after installed LED light bulb on a car, please install a resistor or capacitor to eliminate the error message. This product does not come with an external resistor or capacitor.
Headlight Bulbs Specifications:
● Bulb Socket: 9005/HB3 high beam + H11 low beam
2.This lisiting do not included bulb holders, some of the car need add bulb holder to get the LED bulbs replace the halogen bulbs
3. If there is an error on the onboard computer after installed LED light bulb on a car, please install a resistor or capacitor to eliminate the error message. This product does not come with an external resistor or capacitor.
Headlight Bulbs Specifications:
● Bulb Socket: 9005/HB3 high beam + H11 low beam
● Technology: Bulit in driver & cooling fan
● Operating Voltage: DC 9V ~ 32V , Fit for 12V / 24V vehicle.
● Wattage: 60W per bulb
● Luminous Flux: 6000 LM per bulb
● Color temperature: 6000K
● Light color: Cool White
● Material: Aviation 6063 aluminum profile
● Beam Angle: 360 degree
● Operating Temperature: -40 - +80 degree Celsius
● Waterproof Rate: IP67 rated Waterproof and dust seal, works well even in extreme weather
● Lifespan: over 50000 hours life time, stable quality and long service life
● Application: headlight high beam + low beam
● Built-in constant current CPU,instant full brightness without start-up relay
● Easy plug and play design, no resistor or modification needed.
● Operating Voltage: DC 9V ~ 32V , Fit for 12V / 24V vehicle.
● Wattage: 60W per bulb
● Luminous Flux: 6000 LM per bulb
● Color temperature: 6000K
● Light color: Cool White
● Material: Aviation 6063 aluminum profile
● Beam Angle: 360 degree
● Operating Temperature: -40 - +80 degree Celsius
● Waterproof Rate: IP67 rated Waterproof and dust seal, works well even in extreme weather
● Lifespan: over 50000 hours life time, stable quality and long service life
● Application: headlight high beam + low beam
● Built-in constant current CPU,instant full brightness without start-up relay
● Easy plug and play design, no resistor or modification needed.
Two-way Heat Dissipation Channel:
1. All-in-one aluminum profile as heat conduction system, 360 degree heat radiating.
2. Built-In Turbo Cool Fan, High speed 12000 r/min, high air flow for faster cooling rate.
1. All-in-one aluminum profile as heat conduction system, 360 degree heat radiating.
2. Built-In Turbo Cool Fan, High speed 12000 r/min, high air flow for faster cooling rate.
Package Include:
● 2x 9005 headlight high beam bulbs
● 2x H11 headlight low beam bulbs
● 2x 9005 headlight high beam bulbs
● 2x H11 headlight low beam bulbs
New and old packaging will be shipped randomly
Install Caution：
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Install Caution：
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Contact Us:
Please contact us first before you leave a negative feedback, we will try our best to solve problem for you. Thanks.
Please contact us first before you leave a negative feedback, we will try our best to solve problem for you. Thanks.