Window Regulator with Motor Rear Left Driver for Jeep Liberty KJ 2002-2007 SUV

About this item

 

  • [ENSURE THE KAX WINDOW REGULATOR FITS YOUR VEHICLE] - Make sure that the part fits your exact vehicle, please check the plug & fitment notes & filter system & description for accurate information.
  • [KAX OE REPLACEMENT WINDOW LIFT] - Location: Rear Left Driver Side. Replace Part Number: 748-569, 55360035AJ, 68059647AB.
  • [COMPATIBLE MODEL] - Fits Liberty 2002-2007.
  • [EASY TO INSTALL] - You can install this adjuster component without special tools, which only takes around 30 - 50 minutes.
  • [QUALITY CERTIFICATION] - Durability and life cycle tested to meet or exceed OEM. After through thousands of cycles in the actual door for extensive testing to ensure long-term trouble-free service life.

 

Highlights include

  •    Built to meet or exceed original equipment performance

 

  •    Simple electrical plug assembly, no wire splicing necessary

 

  •    High-quality steel and plastic compounds for greater durability

 

Your "Right Part" Checklist

 

Use the compatibility chart to identify your vehicle.

 

Visually compare the part you are replacing with our pictures.

 

Match reference numbers from the Item specifics section above.

 

Find the year,make, model, engine and trim in vehicle application to ensure.

 

Specifications:

 

Reference OE Number:748-569 55360035AJ 68059647AB

Position: Rear Left, Driver Side

Connector: 2 Pins

Power/Manual: Electric Power Window Regulator

Attachment Type: Bolt On

Material: ABS Plastic and Metal

Motor Included: Yes

Installation: Direct Replacement

Package Included: 1x Power window regulator with motor

 

Fitting for the following vehicles

 

2002-2007 Jeep Liberty Rear Left with Motor

 

Package


1x Window regulator with Motor in a box

 

Install the window regulator as follows: 

 

Part1 Disconnecting the Window from the Motor

 

1.Remove the interior door panel.   

2.Gently remove the plastic door cover. 

3.Locate the window mounting bolts.  

4.Move the window if necessary to access the bolts. 

5.Remove the bolts while a friend supports the window.  

6.Raise the window up into the door frame. 

7.Use masking tape to secure the window in place. 

 

Part2 Disconnecting the Motor and Regulator

 

8.Remove the window regulator bolts.  

9.Locate and remove the window motor mounting bolts.

10.Disconnect the motor wiring harness connector.  

11.Remove the motor and regulator through the access port. 

12. Connect the regulator to the new motor. 

 

Part3 Installing a New Power Window Motor

 

13.Slide the new motor and regulator back into place.  

14.Replace the mounting bolts. 

15.Reconnect the electrical connector.   

16.Remove the masking tape and lower the window back down. 

17.Insert the window mounting bolts.   

18.Reinstall the plastic liner and interior panel. 


Item Specifics
Brand KAX
Manufacturer Part Number 55360035AJ, 68059647AB,748-569
Type Window Regulator
Placement on Vehicle Left
Fitment Type Direct Replacement
Manufacturer Warranty 5 Years
Make Jeep
Model Liberty
Year 2002-2007
Body Style Sport Utility
Note It is ball stud style window regulator
OE/OEM Part Number 748-569

Payment

Paypal only eCheque will be held until cleared, All ship to paypal address. Appreciated for the prompt payment, Contact us if bid by mistake, system open unpaid item automatically.

Payment must be complete within 3 days from the date you purchase or after the end of auction. Items unpaid within 3 days of the auction end will be forfeited. We reserve the right of cancel the order and re-selling the items.

Shipping
DOMESTIC LOWER 48 US STATES: FREE
 
 
VERY IMPORTANT:
Double check shipping address. We are not responsible for incorrect or undeliverable addresses.
 
Please use Shipping & Payments tab on top of page for shipping details for your location.
 
 
US Territories such as GU, VI, SAIPAN will be charged the same as CANADA shipping rate. Transaction will be held until a full shipping amount received.
 
Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.
 
 
International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.
 
We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.A
Returns
Contact Us

Please leave five stars positive feedback positive comment and Five-Stars.

Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything,

communication Please!

(NO Three stars is LOW star, NO 1,2,3 stars PLEASE!

(YES Please give us Five-star!

Have Question or Problem??

Step 1: Contact seller

Step 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message . NO others please!

Select a topic:

I have a question about using my item or I want to send the seller a message(0)(YES)

YES, THIS ONE!!! We will try our best to solve online if possible, if not, will give correct return address.

I did not receive my item(2)(NO)

I need to return my item(1)(NO)

I receive an item that was not as described(1)(NO)

Request to cancel this order(1)(NO)

Step 3: Describe your question clearly; we will give you the best solution

We will help you to track the parcel all the way and give best solution for your order, please do not open case before give us a chance for communication!

1. We have always been trying to provide the best service and reliable product for every customer, However , accident may happen sometimes please contact us solve any issue before leaving a negative feedback.

2. We have a very professional and attentive customer support team. Welcome to contact us any time and any issue will be solved by our great communications.

♡Serve♡

Pair Front Lower Control Arm w/ Ball Joints For Honda Odyssey 2005 2006-2010



Features

【Easy to Install】 Designed by the manufacturer's in-house engineering team. Strict tolerance testing. Plug-and-play, direct fit to ensure a perfect match with your model. Quick and easy installation.

【Improved Handling】The control arm is OEM designed to provide precise steering response and better handling characteristics. They ensure that the wheels maintain proper alignment, enabling the vehicle to maintain grip and stability during cornering and maneuvering.

【Durability and Longevity】 Our control arms are typically constructed from durable materials, such as forged steel or aluminum, that are specifically engineered to withstand the constant stress and strain experienced while driving. This ensures long-lasting performance and high resistance to wear and tear.

【Noise and Vibration Reduction】 These control arms equipped with advanced bushings and ball joints help minimize noise and vibration transmission from the suspension to the vehicle chassis. This enhances the overall driving experience by reducing unwanted disturbances and creating a quieter cabin environment.

【Compatibility】Before placing the order, please check your car model in the Compatibility table. We try to provide quality products and service to our customers. Any problem please feel free to contact us and you will get a satisfactory solution. With nothing to worry about, try it today!


Fitment:
2005-2010 Honda Odyssey

Kit Includes:
2Pcs Front Left-Right Lower Control Arm Ball Joint
 

Important Q&A

(1).Do I need to replace the control arm if the bushings are worn?

Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm.

(2).What happens if a ball joint breaks?

When a ball joint breaks, you will hear a mysterious noise inside your car wheel.

Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control.

If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious.

Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car.

(3).What happens if I don't replace ball joints?

If you don't want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new.

(4).Do I need to grease new ball joints?

I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation.

(5).Why should I get my tie rods inspected on a regular basis?

If you don't get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it's possible that bad tie rods may be the culprit. Your vehicle's tires will also show uneven wear on the inside and outside edge of the tire when there's a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation.

(6).Vibrations

One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive.

(7).Shaking

As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom.

(8).Wandering

If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may "wander" as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic.

(9).What are the symptoms of a bad sway bar?

Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns.

(10).What happens when a sway bar breaks?

Because a sway bar helps the car's suspension to put more pressure on loaded springs, a broken sway bar means that the car's suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds.

Item Specifics
Brand KAC
Fitment Type Direct Replacement
Interchange Part Number RK620505;RK620504
Type Control Arm & Ball Joint
Manufacturer Part Number RK620505;RK620504
Manufacturer Warranty 5 Years
Placement on Vehicle Lower, Left, Right, Front
Items Included Control Arm, Ball Joint


Paypal only eCheque will be held until cleared, All ship to paypal address. Appreciated for the prompt payment, Contact us if bid by mistake, system open unpaid item automatically.

Payment must be complete within 3 days from the date you purchase or after the end of auction. Items unpaid within 3 days of the auction end will be forfeited. We reserve the right of cancel the order and re-selling the items.

DOMESTIC LOWER 48 US STATES: FREE
 
 
VERY IMPORTANT:
Double check shipping address. We are not responsible for incorrect or undeliverable addresses.
 
Please use Shipping & Payments tab on top of page for shipping details for your location.
 
 
US Territories such as GU, VI, SAIPAN will be charged the same as CANADA shipping rate. Transaction will be held until a full shipping amount received.
 
Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.
 
 
International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.
 
We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.A

Please leave five stars positive feedback positive comment and Five-Stars.

Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything,

communication Please!

(NO Three stars is LOW star, NO 1,2,3 stars PLEASE!

(YES Please give us Five-star!

Have Question or Problem??

Step 1: Contact seller

Step 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message . NO others please!

Select a topic:

I have a question about using my item or I want to send the seller a message(0)(YES)

YES, THIS ONE!!! We will try our best to solve online if possible, if not, will give correct return address.

I did not receive my item(2)(NO)

I need to return my item(1)(NO)

I receive an item that was not as described(1)(NO)

Request to cancel this order(1)(NO)

Step 3: Describe your question clearly; we will give you the best solution

We will help you to track the parcel all the way and give best solution for your order, please do not open case before give us a chance for communication!

1. We have always been trying to provide the best service and reliable product for every customer, However , accident may happen sometimes please contact us solve any issue before leaving a negative feedback.

2. We have a very professional and attentive customer support team. Welcome to contact us any time and any issue will be solved by our great communications.




DataCaciques