Original Equipment Secondary Driven Clutch Cam Helix for Can Am Maverick R, DS, RR / Defender HD10 & HD9 for all models that have been increased to or orignal came with 185-205 HP. P/N 420280846 48/52 angle. This listing @ $79.95 is just for the 48/52 Helix. Custom kits can be made per the description below, but prices will vary depending on your year, model, HP level Tire Size etc. Message us your specifics and we can send you a quote. If you click buy now, you will only receive the 48/52 Helix.

- Need new Rollers we have those in stock

- Need a new secondary spring we have those in stock

- Complete clutches and or clutch kits available.

MCB has 35 years experience in tuning CVT style clutches 

MFG PART #: MCB-420280846

- This is a direct replacement helix for all Can Am X3 RR 195hp models

- It can and should also be used on any X3 DS, R, XRS, XDS / Defender HD10 or HD9 that has been tuned to have higher HP than stock.

- Many other angles are available for custom applications

- Let MCB custom build you a clutch kit specific to your Year / Model / Tire Size / Riding Style / modifications.

- MCB understands what helix angle and spring rates to run based on your model, HP level, Tire Size, or riding Style. MCB can custom build you a clutch kit that will perform better and significantly improve the longevity of your clutches and belt by reducing the load applied to the clutches and belt via proper clutch calibration after after such modifications as Tire Size and or added HP via tuning or bolt on parts.

- Each kit is custom. For example, if you are a Farmer in Montana at 8500 feet elevation with a HD10 and you've added 33" tires and your main use is towing heavy loads or plowing snow etc. You have added significant load just via the Tire Size, then in addition you are now towing and or plowing. This is an extreme load put on the clutches and belt that were originally set up for 0-4500 feet elevation and general purpose trail use. We can calibrate the clutch with a proper helix angle, spring rates (primary and secondary) plus weight combination to make the motor, clutches and belt see significantly less load, and significantly improve longevity of the above mentioned components.

The important facts to tell us

- Exact year, make and model of your UTV /  SXS

- Tire Size (very critical)

- Added HP via a tuner (how much over stock, or total known HP)

- Elevation 0-4500 or 4500 and above

- Riding Style (all low speed torque, midrange trail, high speed roads, plowing, towing)

- MCB will custom tune helix angles, spring rates, and flyweight mass based on all the above factors!

Prices vary depending, this particular auction if you click buy it now is just for a 48/52 helix that is used in all the X3 RR 195hp models

READY TO SHIP!

READY TO INSTALL!!