Product Description
Note:
1. This kit is for vehicles with Factory Halogen Systems, it will not work with vehicles with Factory HID.Pls confirm the item if it can matches your car before you purchase.
2.This lisiting do not included bulb holders, some of the car need add bulb holder to get the LED bulbs replace the halogen bulbs
3. If there is an error on the onboard computer after installed LED light bulb on a car, please install a resistor or capacitor to eliminate the error message. This product does not come with an external resistor or capacitor.
1. This kit is for vehicles with Factory Halogen Systems, it will not work with vehicles with Factory HID.Pls confirm the item if it can matches your car before you purchase.
2.This lisiting do not included bulb holders, some of the car need add bulb holder to get the LED bulbs replace the halogen bulbs
3. If there is an error on the onboard computer after installed LED light bulb on a car, please install a resistor or capacitor to eliminate the error message. This product does not come with an external resistor or capacitor.
Features:
-9005（HighBeam）+ H11（Low Beam）+ 9145/H10/9140 (fog light) LED replacement bulbs are engineered for superior performance, exceptional looks, and increased safety.
-Especially designed for upgrading the Headlight,Fog light,Daytime Running Light
-Bulb Size: 9005（HighBeam）+ H11（Low Beam）+ 9145/H10/9140 (fog light)
-100% Brand New and High quality.
-Use COB Led technoloty, amazing super bright lighting
-LED Type: LED chip high power
-Application: Headlight / Fog Driving Light / Daytime Running Light
-Beam Type: High Beam / Low Beam / 360°Beam Angle
-Color Temperature: 6000K White
-Working Voltage: DC 12V to 24V
-No delay to light up, Faster on/off response time
-Lifespan: 50,000 working hours ,Adopt imported chips, stable quality, long service life
-Aluminum heat sink design,built-in automotive circuit to prevent electronic interference.
-The model is as the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required
-Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car
-9005（HighBeam）+ H11（Low Beam）+ 9145/H10/9140 (fog light) LED replacement bulbs are engineered for superior performance, exceptional looks, and increased safety.
-Especially designed for upgrading the Headlight,Fog light,Daytime Running Light
-Bulb Size: 9005（HighBeam）+ H11（Low Beam）+ 9145/H10/9140 (fog light)
-100% Brand New and High quality.
-Use COB Led technoloty, amazing super bright lighting
-LED Type: LED chip high power
-Application: Headlight / Fog Driving Light / Daytime Running Light
-Beam Type: High Beam / Low Beam / 360°Beam Angle
-Color Temperature: 6000K White
-Working Voltage: DC 12V to 24V
-No delay to light up, Faster on/off response time
-Lifespan: 50,000 working hours ,Adopt imported chips, stable quality, long service life
-Aluminum heat sink design,built-in automotive circuit to prevent electronic interference.
-The model is as the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required
-Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car
Automotive LED headlamps advantages:
1. LED lights than traditional halogen energy, more power.
2. Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
3. Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable.Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .
4. Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
5. LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
6. Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K.
1. LED lights than traditional halogen energy, more power.
2. Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
3. Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable.Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .
4. Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
5. LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
6. Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K.
Package Content:
2 x 9005/HB3 LED Headlights Bulbs
2 x H11 LED Headlights Bulbs
2 x 9145/9140 LED Headlights Bulbs
2 x 9005/HB3 LED Headlights Bulbs
2 x H11 LED Headlights Bulbs
2 x 9145/9140 LED Headlights Bulbs
Well Packaged in Retail Box
5 Years Warranty
5 Years Warranty
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.