• Description:
    • 100% Brand new,never been used
    • Professional installation in highly recommended(No instruction included)​
    • Saginaw Power Steering Pump:
    • Early Chevy style 1965-79 pump with threaded and 5/8 keyed shaft.  
    • It will mount to most Chevy/GM engines with the correct mounting bracket 
    • Pump has a 3/8" hose barb for return line and a female 5/8"-18 inverted flare fitting for the high pressure outlet.  
    • Equivalent to to original pump found on 1970-74 Camaro/Firebird, 1970-74 Nova, 1970-74 Chevelle/Malibu, 1970-74 Monte Carlo and many more.
  • Ssnpower718

    Best choice of motor parts

    For SBC Chevy Saginaw Power Steering Pump & 1 Groove Keyway Pulley Bracket Kit

    Description:

    • 100% Brand new,never been used
    • Professional installation in highly recommended(No instruction included)​

    • Saginaw Power Steering Pump:
    • Early Chevy style 1965-79 pump with threaded and 5/8 keyed shaft.  
    • It will mount to most Chevy/GM engines with the correct mounting bracket 
    • Pump has a 3/8" hose barb for return line and a female 5/8"-18 inverted flare fitting for the high pressure outlet.  
    • Equivalent to to original pump found on 1970-74 Camaro/Firebird, 1970-74 Nova, 1970-74 Chevelle/Malibu, 1970-74 Monte Carlo and many more.

    • Keyway Power Steering Pump Pulley:
    • Single groove
    • Machined from billet aluminum
    • Diameter is 5 3/4"
    • The shaft is 5/8" standard
    • These feature deep grooves to prevent belts from slipping
    • Fits all GM key-way power steering units through 1984 with a 5/8" Shaft. 

    • Power Steering Pump Bracket:
    • This power steering pump bracket is for the Small Block Chevy engine with the long water pump.
    • Made from billet aluminum
    • Polished Aluminum Finish
    • It mounts on the drivers side, using the original holes in the block.
    • All the necessary hardware for installation is included.

    Note:

    • This Pump comes with 5/8" inverted flare inlet for the PSI Hose
    • 1975 and later vehicles will require a new hose to go from a metric o-ring style to the 5/8" Inverted flare.
    • A different bracket must be used if your alternator is mounted over the exhaust manifold towards the outside of the head. due to alternator belt interference problem with base and adjusting arm.
    • Short water pump applications may require a 3 groove crank pulley

    Fitment:

    • For Small Block Chevy 265 283 305 327 350 383 and 400 Engines.  
    • Most Common Were 70-74 Camaro & Firebird, 70-74 Nova, 65-79 Chevy / Gmc Trucks, 70-74 Chevelle Malibu El Camino, 70-74 Monte Carlo, 65-79 Impala, Caprice, Bel Air, Etc.

     

    Package Includes:

    • 1X Power Steering Pump
    • 1X Power Steering Pump Pulley 
    • 1X Mounting Bracket Kit
    • As the pictures show

     

     


    Item Specifics
    Brand ssnpower718
    Type Power Steering Pump & Pulley & Bracket Kit
    Fitment Type Direct Replacement
    Surface Finish Polished
    OE Spec or Performance/Custom Performance/Custom

    Payment

    All major credit cards are accepted through secure payment processor Ebay payment.Payment must be received within 7 business days of auction closing.

    Shipping

    We usually ship within 1-3 business days(Monday- Friday)after receiving cleared payment.

    The orders of Friday would be shiped in the next Monday.

    We will ship our product from United States, and it may takes about 3 to 10 business days to arrive your place.

    Returns

    Change-of-mind return can only be accepted within 7 days after purchase.

    All other returns can be accepted in 30 days.

    Contact Us

    And our Office is closed on weekends and public holidays.

    We apologize for the late reply during the holidays.

    Ssnpower718

    Best choice of motor parts

    For SBC Chevy Saginaw Power Steering Pump & 1 Groove Keyway Pulley Bracket Kit

    Description:

    • 100% Brand new,never been used
    • Professional installation in highly recommended(No instruction included)​

    • Saginaw Power Steering Pump:
    • Early Chevy style 1965-79 pump with threaded and 5/8 keyed shaft.  
    • It will mount to most Chevy/GM engines with the correct mounting bracket 
    • Pump has a 3/8" hose barb for return line and a female 5/8"-18 inverted flare fitting for the high pressure outlet.  
    • Equivalent to to original pump found on 1970-74 Camaro/Firebird, 1970-74 Nova, 1970-74 Chevelle/Malibu, 1970-74 Monte Carlo and many more.

    • Keyway Power Steering Pump Pulley:
    • Single groove
    • Machined from billet aluminum
    • Diameter is 5 3/4"
    • The shaft is 5/8" standard
    • These feature deep grooves to prevent belts from slipping
    • Fits all GM key-way power steering units through 1984 with a 5/8" Shaft. 

    • Power Steering Pump Bracket:
    • This power steering pump bracket is for the Small Block Chevy engine with the long water pump.
    • Made from billet aluminum
    • Polished Aluminum Finish
    • It mounts on the drivers side, using the original holes in the block.
    • All the necessary hardware for installation is included.

    Note:

    • This Pump comes with 5/8" inverted flare inlet for the PSI Hose
    • 1975 and later vehicles will require a new hose to go from a metric o-ring style to the 5/8" Inverted flare.
    • A different bracket must be used if your alternator is mounted over the exhaust manifold towards the outside of the head. due to alternator belt interference problem with base and adjusting arm.
    • Short water pump applications may require a 3 groove crank pulley

    Fitment:

    • For Small Block Chevy 265 283 305 327 350 383 and 400 Engines.  
    • Most Common Were 70-74 Camaro & Firebird, 70-74 Nova, 65-79 Chevy / Gmc Trucks, 70-74 Chevelle Malibu El Camino, 70-74 Monte Carlo, 65-79 Impala, Caprice, Bel Air, Etc.

     

    Package Includes:

    • 1X Power Steering Pump
    • 1X Power Steering Pump Pulley 
    • 1X Mounting Bracket Kit
    • As the pictures show

     

     

    Item Specifics
    Brand :ssnpower718
    Type :Power Steering Pump & Pulley & Bracket Kit
    Fitment Type :Direct Replacement
    Surface Finish :Polished
    OE Spec or Performance/Custom :Performance/Custom


    All major credit cards are accepted through secure payment processor Ebay payment.Payment must be received within 7 business days of auction closing.

    We usually ship within 1-3 business days(Monday- Friday)after receiving cleared payment.

    The orders of Friday would be shiped in the next Monday.

    We will ship our product from United States, and it may takes about 3 to 10 business days to arrive your place.

    Change-of-mind return can only be accepted within 7 days after purchase.

    All other returns can be accepted in 30 days.

    And our Office is closed on weekends and public holidays.

    We apologize for the late reply during the holidays.


    All rights reserved.