60" 3-Row 864 LED Truck Tailgate Light Strip Bar Sequential Signal Brake Reverse
3Row Foldable Tailgate Light Bar
Specifications:
Brand New,100% high quality.
Type: 864LEDs 60inch LED Strip light bar, 3-Row Foldable Tailgate Light Bar
Input voltage: DC12V
LED power: 40W
Strip light Length: 60 inch(150cm)
Strip light width : 0.7inch (17mm)
Strip light height: 0.7inch (17mm)
Waterproof: IP65
Material: SMD LEDs + Silicone
Feature: Foldable
Led quantity: 864pcs (288pcs Red SMD + 288pcs White SMD + 288pcs Amber SMD)
Function as a brake light, left/right turn signal light, and backup reverse light
Light Color: Red for Brake, White for Reverse Lights,Yellow for Flow Turn Signal and Double Flash .
Note: This led strip only performs one function. When both brake and turn signal are applied, only the brake light on the LED strip is turned on. The turn signal will start functioning until the brake is released.
Note: This led strip only performs one function. When both brake and turn signal are applied, only the brake light on the LED strip is turned on. The turn signal will start functioning until the brake is released.
60" LED Tailgate Light Bar for Pick Up Trucks Trailers Vehicles
BRIGHT LIGHTS: With 864pcs(288Pcs Red+288Pcs Yellow+288Pcs White)2835 SMD led chips to give out the super-bright beam. Adds clear visibility to the rear drivers, better-ensuring safe traffic on roads.
FULL FUNCTIONS: The new style Foldable tailgate light features full functions of the brake, flowing turn signal, double flash, and Reverse light. The foldable design allows for flexible installation without left or right orientation constraints.
PREMIUM QUALITY: Adopts fully sealed silicone housing with IP65 waterproof rate, works well whatever in rainy or snowy days. With inline fuse for short circuit protection, heavy-duty, and super durable.
EASY TO INSTALL LED Tailgate Light Bar: Plug and play connectivity with flat 4-pin trailer connection harness for brake/signal. No drilling required, using high-quality automotive adhesive and self-tapping screws for a fast, secure mounting, quickly hardwire to the tow trailer connector harness.
UNIVERSAL FITMENT: This flexible light strip features 60 inches long, widely suited for almost all 12V operated at DC 12V wide voltage, Pickup Trucks, Trailers, Cars, SUV, RV, VAN, boat anchor, etc.
What's Included?
1x 60inch Truck Tailgate LED Light Strip with sticky tape
1x 4-way Flat Female to Color Coded Pigtail Wires Adapter
Screws,connectors and Zip ties
General installation information:
1. Select desired mounting position and make sure that the surface is clean and clear of dirt, water or wax.
2. Peel off the sticky tape and stick the tailgate bar onto the car
3. Connect the power cord to vehicle
4. Plug and play connectivity with flat 4-pin trailer connection harness for brake/signal, will need to tap wire for the backup reverse light
2. Peel off the sticky tape and stick the tailgate bar onto the car
3. Connect the power cord to vehicle
4. Plug and play connectivity with flat 4-pin trailer connection harness for brake/signal, will need to tap wire for the backup reverse light
About the Installation:
(1) It's a universal fit, but pls measure the area you're going to install it in first before ordering.
(2) How to install? Do I have to screw the screws if I install it?
No screws necessary. It has a sticky tape already in place. Just peel the paper cover and stick on the tailgate.
(1) It's a universal fit, but pls measure the area you're going to install it in first before ordering.
(2) How to install? Do I have to screw the screws if I install it?
No screws necessary. It has a sticky tape already in place. Just peel the paper cover and stick on the tailgate.
UPGRADED 6-Functions：
Running mode, all red LEDs light up(dipped beam)
Brake mode, all Red LEDs light up(high beam)
Reverse mode, all White LEDs light up
Turn left mode, left Amber LEDs sequentially flowing light up
Turn right mode, right Amber LEDs sequentially flowing light up
Hazard Emergency Double Flash Mode:left & Right indicator sequentially flowing from center to both sides.
Running mode, all red LEDs light up(dipped beam)
Brake mode, all Red LEDs light up(high beam)
Reverse mode, all White LEDs light up
Turn left mode, left Amber LEDs sequentially flowing light up
Turn right mode, right Amber LEDs sequentially flowing light up
Hazard Emergency Double Flash Mode:left & Right indicator sequentially flowing from center to both sides.
Wires Connection Tips
Green wire is connected to the right turn/Brake;
Yellow wire is connected to the left turn/Brake;
Brown wire is connected to Running;
White wire is connected to the gound;
Single White wire is connected to Reverse.
