Description
The grain mill grinder can mill the high volumes of grain to make flour and recipes incredibly easy. Owning your own grain mill will allow you to control exactly what goes into your bread, baking and other cooking and eating. In addition, grinding grains yourself means you will get more vitamins and minerals and their attendant health benefits.
【SAFETY LID DESIGN & OVERLOAD PROTECTION】Grain grinder made of food-grade stainless steel, sturdy and durable.The electric grain mill grinder herb equipment will automatically turn off the power when overloaded, to protect your safety, gently press red button reset, you can continue to use it normally.
【STAINLESS STEEL MATERIAL】The electric grain grinder mill's body is made of high quality 430 stainless steel and meets food safety requirements.Mills electric grain equipped with stainless steel three-layer blades with 25000rpm super high grinding speed, and the fineness can reach to 60-300 mesh, make the powder more delicate and increase your work efficiency.
【MULTIPURPOSE GRINDER MILL】Applicable to pulverizing all kinds of dried materials, including grains, soy, corn, barley, rice, wheat, mung beans, coffee beans), spices (star anise, fennel, pepper, rosemary), herbs, sesame, peanuts, walnuts. Please make sure the materials you gonna to grind cover the long blade and no more than 2/3 of the jar to leave the space for blade's turning when grinding.
【180° SWING TYPE】Swing type is more convenient than stand type.convenient to swing the machine body when it is working, which can make powder more uniform and fine. You could swing the machine body to pour the powder out instead of pick up the whole grinder. Spice grinder electric can set the time, 0~5min, it will stop automatically, save your time and effort.
【SCOPE OF USE】Grain grinder electric is widely used in families, kitchens, restaurants, clinic, pharmacy, institute laboratories, food store and powder processing, instead of traditional grinders.If there is anything we can help with, warmly welcome to contact us.
Model: A0622
Material: 430 Stainless Steel
Voltage: 110V
Capacity: 2500g
Load Power: 4200W
Speed: 32000 r/min
Continuous Working Time: less than 5 minutes
Interval Time: 5-10 minutes
Powder Fineness: 60-300 Mesh
Weight: 7.7 kg (17 Ib)
1. After each grinding, use a moist paper towel or cloth to clean up the food powder, not directly rinse with water,which will damage the motor；
2. After cleaning, please put it in a ventilated place, so that the inner compartment to keep dry, check the dry and then cover the lid and store.
1. The working principle is to crush the material into powder by the high speed rotation of the blades. The whole process takes place in an enclosed grinding chamber, which generates heat and causes the machine to heat up. Therefore, it is normal for the grinder to be slightly heated.
2. Recommend use time is no more than 3 minutes. Do not continuously operate the machine, and it takes 5-10 minutes to rest after every 3 minutes of grinding work.
3. Dry raw materials only.wet, moisture or oil materials can't be ground
4. When the first several uses there may be a smell，you can Grind some Rice or Dried Tea first for several times to eliminate the odor.
1 x Electric Grain Grinder
1 x Carbon Brush
1 x Flour Sieve
1 x Power Cord
1 x Cleaning Brush
 |
|
|
|---|---|---|
3-Layer BladeThree kinds of stainless steel blades: powder blade(impact crush), rotary blade(cycle grinding), dust removal blade(clean the bottom). The fineness of grinding from 60 mesh to 300 mesh. |
270° Swing DesignSwing type is more convenient than upright type. You could swing the machine body to pour the powder out instead of pick up the whole grinder. And Swinging the grinder when it is working, which can make powder more uniform and fine. |
Lid Buckle DesignGently lock, firmly locked. Fasten the buckle during grinding to prevent powder spillage. |
|
|
|
|
|---|---|---|
Round Fine Mesh SifterPour the flour into the flour sieve, then shake it back or pat the flour sieve. The sieved flour will be more delicate, and the biscuits and cakes will be smoother. |
Timing SwitchYou can adjust time within 0~5 min, when time is up, the machine will stop automatically, no need to wait all the time, save time and effort. |
Overload Protection ButtonWhen the machine is overloaded, the machine can be restored to work only by pressing this switch, which can ensure the machine keeps running and won't burn the motor. |
Different materials, the grinding effect is different according to the grinding time:
1. The materials ready for grinding must be dry.
2. Recommend grinding capacity one time：the material you gonna to grind one time must cover the long blade in the middle and no more than 2/3 of the tank.
3. Recommend use time: no more than 3 minutes. It takes 5-10 minutes to rest after every 3 minutes of work.
4. Please do not turn on the machine when the top cover is open.
5. Please change the barbon brush and blade afer long time use.
6. Please check the screws of the blade.
7. CANNOT be cleaned with water directly. You can clean up the remaining powder inside the jar with a cleaning brush and then wipe the inside of jar with a dry cloth.
8. To remove the blades, Use a screwdriver to hold down the middle screw, and Drive the wrench or sleeve counter-clockwise to loosen the locknut on the blade
9. Sometimes the grinder machine is not working,such as bad smell or smoke. Please don't worry and cut off the power. Check whether the CARBON BRUSHES are loosing ans Please Tighten the carbon brushes on both sides or Reducing the amount of grinding powder then try to start the grinder.
10. The working principle is to crush the material into powder by the high speed rotation of the blades. The whole process takes place in an enclosed grinding chamber, which generates heat and causes the machine to heat up. Therefore, it is normal for the grinder to be slightly heated.
11. When it starts up, please shut off the power supply immediately if the blade is stuck by the smashing materials and the motor does not run (buzzing noise occurs) to avoid burning the motor, and then remove the blocks, check the fuse and restart the machine.
Payment
1. We only accept PayPal, payment system supports Mastercard, Visa, Discover, American Express and eCheck.
2. The order will be processed and shipped within the promised time, so we do not accept any email/message instructions after you place the order.
3. If you have any questions, please contact us via eBay message before placing an order, we will solve your questions as soon as possible, thanks.
Shipping
❤ For products located in China, buyers are required to pay import duties, taxes and fees not included in the item price or shipping. These costs are the buyer's responsibility.
2. Delivery time depends on destination and other factors. Package tracking information will usually be updated in 24-72 hours.
3. Any questions please contact us via eBay message first. We will do our best to resolve your issue as soon as possible.
4. We only ship to the approved address given in EBAY payment. Please make sure payment address in EBAY is correct. Any non-received items caused by invalid address registered on EBAY are not in our full refund or replacement policy.
Delivery Details
1. Most Items Free Shipping within the 48 States. We ship within the United States only. The term EXCLUDES the states of Alaska, Hawaii and all off-shore U.S. territories and possessions such as Puerto Rico, Guam and Virgin Islands. We do not ship to APO and FPO.
2. Delivery Time: 4-7 business days (Varies by Destination)
3. Shipping Carriers are responsible on the delivery time. If you have any questions or problems with delivery, please contact carrier directly first.
4. We are not responsible for carrier transit time. This information is provided by the carrier and excludes weekends and holidays. Please Note that transit times may vary, particularly during peak periods or in climate weather conditions, the delivery time may be extended, please feel free to contact us in this case, and please do not open disputes on ebay at will, we will do our best to help you to solve the problem, thank you！
Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.
1. We are the seller of good faith, high quality products, best service for you !!!
2. If you have any question or problem with your order, please do not hesitate to contact us via ebay message or email us. We will reply your message within 24-48 hours. Please contact us BEFORE leaving any Negative Feedback. Thanks !
3. If the item you received is faulty, damaged , incorrect, or any further problems, you can return it for replacement or refund, please contact our customer service on eBay within 30 days from item received.
4. If you don't like the product after receiving it, please do not open the package, contact us for the return address, and send us the original package, thank you！
Monday - Saturday (9am-6pm)
Sunday - Closed
ALL E-mails will be replied to within 24-48 hours.
On Sep 10, 2025 at 20:08:57 PDT, seller added the following information: