To US buyers: our company will pay tariffs on our side, so you don't need to pay any taxes when the package arrive your country ( DDP ).
Thank you for your kindly understanding, let's hope new negotiations can start then bring shipping customs rates down and calm the market down in the near furture.
- Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.
- Electronic digital thermostat with double 3-digit LED display, extremely bright and red. Operation both in heating and cooling to easily control equipment and devices.
- The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
- The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling.
- The XH-W1219 thermostat module with its STM8S µC and I/O (sensor input, keys, double display, relay) can be re-programmed for automation tasks, e.g. timing, control, or counting.
Specification:
Model: XH-W1219
Power Supply: DC12V
Relay Current: 50mA
Control Range: -50~110 celsius
Control Precision: 0.1 celsius
Measuring Input: NTC10K waterproof sensor L=0.5m
High Temperature Alarm: -49~110 celsius
Input Voltage: DC 12V
Output Type: relay output 10A (max)
Return Difference Setting: 0.1~30 celsius
Delay Starting: 0-10min
Temperature Calibration: -10~10 celsius
Size: 60*43*16mm
P0: Temperature Control Mode(Cooling/Heating): when first use this product, if it is used to heating, please set H, if used to cooling, please set C.
P1: Return Difference Setting(0.1~30 celsius): long press SET key entering into the internal setting, choose P1 setting; then press SET key to achieve return difference value setting
P2: Temperature Calibration: this function is for temperature calibration. If the detection temperature and the actual temperature is different, then users can apply this function to calibrate
P3: Delay Start Time(0~10 minutes): this function is for compressor cooling
P4: Set High-Temperature Alarm Value(-50~110 Celsius): when the actual temperature is higher than this value, the screen will flash and sound an alarm
Restore Factory Settings: While power is on, press and hold the + - button for 3 seconds
Model: XH-W1219
Power Supply: DC12V
Relay Current: 50mA
Control Range: -50~110 celsius
Control Precision: 0.1 celsius
Measuring Input: NTC10K waterproof sensor L=0.5m
High Temperature Alarm: -49~110 celsius
Input Voltage: DC 12V
Output Type: relay output 10A (max)
Return Difference Setting: 0.1~30 celsius
Delay Starting: 0-10min
Temperature Calibration: -10~10 celsius
Size: 60*43*16mm
P0: Temperature Control Mode(Cooling/Heating): when first use this product, if it is used to heating, please set H, if used to cooling, please set C.
P1: Return Difference Setting(0.1~30 celsius): long press SET key entering into the internal setting, choose P1 setting; then press SET key to achieve return difference value setting
P2: Temperature Calibration: this function is for temperature calibration. If the detection temperature and the actual temperature is different, then users can apply this function to calibrate
P3: Delay Start Time(0~10 minutes): this function is for compressor cooling
P4: Set High-Temperature Alarm Value(-50~110 Celsius): when the actual temperature is higher than this value, the screen will flash and sound an alarm
Restore Factory Settings: While power is on, press and hold the + - button for 3 seconds
Package included:
1X Temperature Controller Module Double Display Digital Thermostat Accuracy 0.1
Positive f
