Tired of cranking the handle on your tubing bender? Are you using a 6' cheater bar slid over the factory handle to gain mechanical leverage, while trying to read the degree wheel that is ~ 8 feet away? This kit is designed out of pure necessity and built to be the best kit out on the market.

Designed to fit either the JD-2 Model 3, JD-2 Model 32, Pro Tools 105, 105HD, Woodward Fab WFB2,  Eastwood 21115 ,and JMR manual tubing benders. The brackets are laser cut out of high strength 1/4" steel and formed on a CNC press brake. Sold in two configurations, welded or unwelded. Material thickness and bending capacity vary from tube bender to tube bender please consult your user manual for technical information. Rule of thumb if you can bend it manually then the SWAG air/hydraulic bender can bend the same material with ease.

The JD-2 Model 32 has 2 additional steel brackets and several additional fasteners not show in the picture above, hence the additional cost. The formed version of the JD-2 Model 32 is rate up to .120 wall material.  If you are bending thicker wall material, .188 or larger you will need our machined air/hydro ram mount.

Please note that this kit is 100% complete, however it does not come painted.  Tube bender as well as the 8 ton ram is not included. The 8 Ton Air/Hydraulic ram must have an outside diameter of 80mm.  There are dozens of 8 ton rams that are sold on Ebay & Amazon, however a majority of them have an outside diameter of 84MM with will not work for this application.

The 80mm OD ram we recommend is manufactured by Harbor Freight PN 58816 which can be purchased at your local Harbor Freight store for ~$119.99, don't forget their 20% off coupon. 

This item ships out using USPS priority mail or UPS, please provide a valid shipping address that works for both shipping carriers.

Tube Bender Optional accessory

Elastic Return Spring

Imagine how much easier your job is going if your not having to manually retract your tube bender every time you need to re-pin your die set. The 100 pound of resistances offer by this return spring is backwards compatible with our Air/Hydro tube bender ram mount. No tools required for installation just hook it up to your bender and the back side of your 8 ton ram and your done.

The springs are made of rubber tubing that's encapsulated in a polypropylene fabric sleeve for excellent wear resistance.

Click Here for a YouTube Demo Video and Instructions

Additional details can be found on our website: swagoffroad.com