1080P 3G HD SDI Fiber Optic Extender Converter 20km Local SDI Loop Out BNC Coaxial Signal Optic Dual SDI outputs For Monitor DVD

Introduction:

  The fiber extender transmits 3G/HD-SDI video signals over a long distance through a single fiber cable, and supports 8-channel embedded audio synchronization function; It can adapt to a variety of complex application environments.The equipment has excellent image processing and transmission capabilities, making the signal transmission more smooth and stable. It is a reliable, high performance and efficient 3G/HD-SDI signal extension mode.

Description

Features:

1.Long distance transmission of 3G/HD-SDI video and audio signals through optical fiber, up to 3-20KM (default 3KM)

2.HD video signal resolution up to 1920*1080P@60Hz

3.Support all digital lossless transmission, 8-channel embedded audio and video synchronous transmission

4.Support local output, the remote end support two-way synchronous output

5.Support PAL/NTSC, strong compatibility, able to automatically identify and configure various display modes

6.Support plug and play and hot plug

7.Built-in automatic adjustment system, make the image smooth, clear and stable

8.Built-in ESD protection system

9.Simple to install, plug and play

 

Troubleshooting

1.The red light (PWR) is not bright or the brightness is low, Check whether the power adapter is normal

2.When TX green light (STA) is not on; Check the signal source; The green light stays on indicates regular work.

3.RX green light (STA) is not on, check whether the optical fiber module of the TX contacts normally; The green light (STA) is not on when there is no signal from the TX; Long light indicates that TX and RX work normally.

4.If there is no image on the display, check whether the display selects the correct channel input

 

Specification

Technical Norms:SMPTE standard

Video bit rate:MAX 3.2 GB/Second

Interface:BNC

Input/output cable specification:≤150m（Belden 1694A cable standard）

Video input/output impedance:75Ω

Video input/output voltage:1Vpp;Min:0.5Vpp/Max:1.5Vpp

Differential gain (10% ~ 90% APL):<1%

 

SDI resolution

625/25 PAL,525/29.97NTSC,525/23.98 NTSC

720P@50,720P@59.94,1080i@23/24/30/50/59.94,1080P@23.98/24/30/50/60

 

Support SDI specification

270Mbps(SD-SDI), 1.485Gbps/M(HD-SDI)

SMPTE425M3Gb/s Mapping(3G-SDI）

SMPTE424M 3Gb/s serial

interface:(3G-SDI)

 

Optical fiber interface:LC

Fiber type:Single mode single fiber

wavelength:Single mode 1310nm；1550nm

Max transmission distance Default: 3KM；Max: 20KM

Power:DC 5~12V/1A

Power Consumption:MAX 5W

Temperature:Operating temperature: -20℃ ~ +70℃

Humidity:Operating humidity: 0 ~ 90%

Mean time between failures:≥100000hours

Package Include:  

1 x SDI Transmitter Unit

1 x SDI Receiver Unit

2 x AC 110~240 power supply

1 x User manual