Hydra-UHF-TF universal water-soluble resin-based halogen-free synthetic tacky paste flux (REL0)

Hydra-UHF-TF universal water-soluble resin-based halogen-free synthetic tacky paste flux (REL0)
£16.99
Due to eBay fees, you may find our products are cheaper on our website, you can search the EAN number there to find the same item
May have a short expiry (or past) - but this does not affect the use or effectiveness of flux. This can be used for years after this date.
No-clean solder paste that can be left on the board for many SMT assemblies. For applications requiring cleaning, the paste can be cleaned using commercial residue removers.
Automated cleaning systems for both stencil and misprinted boards. Manual cleaning using isopropyl alcohol (IPA), co-solvents and/or ultrasonic scrubbers, vapor degreaser.
To obtain the maximum shelf life STIRRI Soldering Paste & Liquid Solder™ should be stored in a refrigerator between 3-8°C (37-46°F). Unopened solder paste stored at room temperature, 25°C (77°F). Syringes and cartridges should be stored in the refrigerator vertically, dispensing tip pointing down.
Allow 4-8 hours for solder paste to reach optimal operating temperature of 20-25°C (68-77°F). To avoid condensation inside solder paste – keep solder paste container sealed while warming the solder paste to operating temperature, otherwise moisture may end up inside the container and contaminate solder paste!
NEVER FREEZE SOLDER PASTE!

