Product Details:
Note: This is a DIY Kit, you need to solder assemble it yourself.
Based on Marantz M7 pre-amplifier circuit.
Japanese original ALPS 16 type 100K double potentiometer with 15mm shaft length.
The 0.8MM brushed stainless steel plate CNC stamping chassis makes the signal-to-noise ratio up to -99dB and the background is extremely clean.
The power transformer uses H360 0.5 piece 76*40 iron core. The primary is two sets of 110v, the series connection is 220V, and the parallel connection is 110V. The secondary filament winding is especially grounded with a double-layer shielding layer, and the grounding wire is a yellow-green wire.
A set of filament 3.15V*2 for 3 12AX7 filaments (12AX7 4+5 and 9 feet are 6.3V)
High voltage 270V*2, using 6Z5P electronic tube rectifier.
The amplifying circuit is welded by scaffold bars, and the power supply uses PCB.
4 groups of signal input, 1 group of output.
Use WIMA MKP10 0.1uf capacitors, 0.39u Sweden RIFA PHE426 series, IT 2.2uf, capacitors and other audio dedicated capacitors.
Applicable to global voltage standards, (110V/ 220V through wiring method)
The size of the chassis is 32*17*5cm, and the height is about 10cm. The height of the machine should not be less than 18cm.
Specifications:
Working voltage: AC110V or AC220V~240V
Input socket standard: RCA (4 inputs, 1 output)
Frequency response: 10-26kHz (+/-0.11dB)
Voltage amplification is about 15 times
Total harmonic distortion: 0.078%
Signal to noise ratio: -99dB
Tube: 12AX7B * 3, 6Z5P * 1
Package list:
1 × Tube preamp kit (including tube)