Compatible With: H13 / 9008
Headlight Spesification:
Plug Type: H13/9008,Hi/Low Beam
Power(per set): 240W/Set,120W/bulb
LED Quantity(each bulb): 2pcs* COB chips
Luminous Flux: 42000lm/set(21000lm/bulb)
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: white 6000K
IP68 rated water and dust seal,over 50000hrs lifetime
Beam Angle: 270 degree@low beam,360 degree@high beam
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight
Headlight Spesification:
Plug Type: H13/9008,Hi/Low Beam
Power(per set): 240W/Set,120W/bulb
LED Quantity(each bulb): 2pcs* COB chips
Luminous Flux: 42000lm/set(21000lm/bulb)
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: white 6000K
IP68 rated water and dust seal,over 50000hrs lifetime
Beam Angle: 270 degree@low beam,360 degree@high beam
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight
(2pcs/set)H13/9008 COB Single Beam LED headlight conversion kit
►Mini design, almost 1:1 size as stock halogen, perfectly fit your vehicle without modification even the factory housing has a dust cover or there is limited space on the passenger side, only need 1 minutes, plug and play.
►Super bright COB chip(USA),360 degree clear beam no blind zone, almost 300% brighter than stock halogen
►IP68 waterproof rate proived your safety driving especially in extreme weather like rain/snow/fog
►No Other Fans & Ballasts Required
►Built-in constant current CPU,instant full brightness without start-up relay
►Smart cooling system provide super cooling ability, which ensures a longer lifespan up to 50,000 hours.
►Low Power Consumption than Halogen bulb, Energy Saving
►Low Voltage Protection, High Precision Constant Current driver Chip
►Shakeproof and Long lasting up to 50,000 Hours.
►Mini design, almost 1:1 size as stock halogen, perfectly fit your vehicle without modification even the factory housing has a dust cover or there is limited space on the passenger side, only need 1 minutes, plug and play.
►Super bright COB chip(USA),360 degree clear beam no blind zone, almost 300% brighter than stock halogen
►IP68 waterproof rate proived your safety driving especially in extreme weather like rain/snow/fog
►No Other Fans & Ballasts Required
►Built-in constant current CPU,instant full brightness without start-up relay
►Smart cooling system provide super cooling ability, which ensures a longer lifespan up to 50,000 hours.
►Low Power Consumption than Halogen bulb, Energy Saving
►Low Voltage Protection, High Precision Constant Current driver Chip
►Shakeproof and Long lasting up to 50,000 Hours.
Package Included:
2x H13/9008 LED headlight bulbs
5 Years Warranty
Well Packaged in Retail Box
2x H13/9008 LED headlight bulbs
5 Years Warranty
Well Packaged in Retail Box
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
NOTE: Please contact us first before you leave a negative feedback, we will try our best to solve problem for you. Thanks.