Permatex Optimum Easy-Disassembly Red RTV Silicone Gasket Maker 3 oz Tubes Case

Upgrade your repair toolkit with the Permatex Optimum Easy-Disassembly Red RTV Silicone Gasket Maker in a convenient 3 oz tube. This advanced gasket maker is engineered to provide maximum temperature performance and simplify disassembly, reducing the time it takes to separate engine parts or components. Apply it as you normally would, and when it's time to take parts apart, simply loosen them and peel away the gasket maker effortlessly with your fingers.

The Optimum Easy-Disassembly Red formula offers exceptional resistance to high temperatures, withstanding intermittent heat up to 750°F (399°C)—higher than Ultra Copper and standard RTV Red. It's ideal for high-temperature applications such as exhaust manifolds, headers, turbochargers, and slip-fit exhaust parts. This sensor-safe, non-corrosive RTV silicone is designed to handle high thermal cycling without compromising its sealing capabilities.

Whether you're replacing pre-cut gaskets or creating a formed-in-place gasket, Permatex Optimum Red provides a reliable seal that resists aging, weathering, and thermal cycling without hardening, shrinking, or cracking. It's the perfect solution for demanding automotive and industrial applications where maximum temperature resistance and easy disassembly are crucial.

Item Specifics:

• Brand: Permatex
• Product Name: Optimum Easy-Disassembly Red RTV Silicone Gasket Maker
• Size: 12 x 3 oz Tubes
• Features:
  • Easy Disassembly: Reduces time needed to separate parts during maintenance.
  • Maximum Temperature Performance: Withstands intermittent temperatures up to 750°F (399°C).
  • Sensor-Safe and Non-Corrosive: Safe for all sensors and metals; does not corrode components.
  • OEM Specified: Meets or exceeds Original Equipment Manufacturer specifications.
  • High Thermal Cycling Resistance: Maintains seal integrity under extreme temperature fluctuations.
• Suggested Applications:
  • Exhaust manifolds
  • Headers
  • Slip-fit exhaust parts
  • Turbochargers
• Benefits:
  • Resists high temperatures better than Ultra Copper and regular RTV Red
  • Forms a reliable, long-lasting seal
  • Can be used in place of pre-cut gaskets
  • Resistant to aging and weathering
• Directions for Use:
  1. Prepare Surfaces: Ensure surfaces are clean and dry.
  2. Apply Gasket Maker: Cut the nozzle to the desired bead size (1/16" to 1/4"). Apply a continuous bead to one surface, encircling all bolt holes.
  3. Assemble Parts: Immediately assemble parts while silicone is still wet. Finger-tighten bolts until material begins to squeeze out around the flange.
  4. Initial Cure: Let the assembly dry for one hour, then tighten to the manufacturer's torque specifications.
  5. Full Cure: Allow 24 hours to fully cure before filling with fluids or returning to service.
  6. Storage: Replace cap after use to prevent product from curing in the tube.
• Note: Not recommended for use on head gaskets or parts in contact with gasoline.