Product Introduction

Easy to clean even the toughest car windows!

Recommended for the following situations

When you want to clean the dirt behind the windshield but can't reach...

When you want to clean the dirt from the inside of the car window in a comfortable position!

●For cleaning the inside window of a car from near and far, 360 degrees!

Head that collapses flat to the back

The grip length and angle are designed to be optimal for wiping interior windows, and the head collapses flat to reach deep into the window.

The head can remove dirt from the window in a comfortable posture.

For narrower gaps, please purchase the C140 EXCLEAR Premium 360 Wiper.

Seesaw joint” that moves vertically, horizontally, and laterally

The head can move freely in any direction, up, down, left, or right, so it fits tightly to curved glass surfaces and leaves no residue.

Easy to hold and use “Double Grip

When you want to wipe a distant window or a wide area smoothly, use the grip on the front side, and when you want to wipe a nearby window or a narrow area firmly, use the grip on the back side.

Compact and easy to store!

The head and grip can be detached and stored in a side pocket without being bulky.

A special microfiber cloth for the window is included!

A microfiber cloth with excellent dirt removal performance is included. The head can also be fitted with a commercially available cloth or cloth!

(Cloths measuring 115 mm or more in length and 230 mm or more in width can be attached.)

Points to keep in mind when using the wiper!

1. wipe by moving the head up and down (back and forth)

Move the head in a straight line while pressing it against the glass.

*If the grip is excessively tilted against the surface to be wiped, it may be difficult to wipe.

Adjust the wiping direction so that the grip is upright against the head. 2. 2) Tilt the grip and wipe at different angles

When you want to wipe narrow areas or the back or edge of the windshield, turn the head 90 degrees counterclockwise to make the head as thin as possible, allowing you to wipe more finely.

When the head is unstable...

If the head is unstable, the following may be the cause

Screws are too loose or too tight ➡ Adjust the screws.

Wiped dry ➡Wipe with water or use a cleaner.

Q&A when you have a problem

Q.Can I wipe without anything on the cloth?

➡When using a microfiber cloth or other cloth with high dirt scrubbing performance, be sure to wet it with water or use a cleaner, etc.

Q. Do you have any tips for use on windows that are particularly heavily soiled?

➡When using on a window that is particularly heavily soiled by tar stains, the cloth may get caught on the soiled glass surface and the head may become unstable. In such cases, please do not finish a large area at once, but wipe up by moving the cloth up and down in fine strokes.

Q. Can I use a cloth other than the supplied one?

A. Yes, as long as the cloth is at least 115 mm in length and 230 mm in width. In this case, please secure both ends of the cloth with rubber bands.

Q. Can the rubber band on the head be removed?

Yes, it is.

Please read carefully

Precautions for use

Be sure to use this product with a cloth, etc. attached.

Be careful not to pinch your fingers when assembling the product.

To prevent scratching, remove sand, etc. from the surface of the cloth, etc. and the glass surface before using the product.

Do not use on deteriorated window film or film antenna surfaces as it may scratch them.

Do not use in hot weather or when the glass is hot.

When wiping glass with heat rays, be careful not to scratch the heat rays.

Do not apply excessive force to the wiper head (hereinafter referred to as “head”), wiper grip (hereinafter referred to as “grip”), joints, etc., as this may cause damage to them.

When wiping glass with narrow gaps, such as behind the windshield, be careful that this product does not hit the dashboard as it may scratch the dashboard.

Be careful not to drop the product on concrete or other hard surfaces as this may cause damage.

Do not use petroleum solvents or gasoline on the wiper body as it may cause damage.

Microfiber cloths (hereinafter referred to as “cloths”) may fade in color, so wash them separately from other items.

Do not use bleach, fabric softener, dryer or iron on the cloths as they may discolor or change color.

Do not leave the cloths or other items wet, as the color may migrate to sponges, sheets, etc., and the growth of bacteria may cause a foul odor.

How to use

1. pull the rubber band on the head and fold it over so that it covers the joint side. Do the same for the other side. 2.

Fold the attached cloth in two, place it so that the joint part of the head is in the center of the cloth, and fold both ends of the cloth into the rings of the rubber band to fix them in place.

If the head protrudes from the top and bottom edges of the cross, it may hit the interior and cause scratches. 3.

3. align the button position on the head with the hole position on the grip, and insert the grip into the head. 4.

Wipe with water or apply a cleaner to wipe the interior window.

When wiping with water, wring out the cloth tightly before attaching it to the head.

Product Size

Head: H100 x W150mm

Grip：H380 x W26mm

Contents

Microfiber cloth, wiper head, wiper grip

Name：Car interior window cleaning tool

Material: Body - ABS, Sponge - Polyurethane foam, Rubber band - NBR, Polyester, Microfiber cloth - 85% polyester, 15% nylon

Storage:

Keep out of reach of children, direct sunlight, and high temperatures.

Do not store where it may interfere with the operation of the airbag or driving, or on the dashboard on the driver's side or at the foot of the car. (If it should roll, it could be dangerous if it gets stuck in the pedals.)

Disposal: Dispose of the product in accordance with the instructions of your local government.

Precautions for use

This product must be used with a cloth, etc. attached.