Attachment drill aid for parallel implantation.
Package:
Drilling arm*1pc
Guid pins:
φ1.8mm Short/Long*1pcs
φ2.0mm Short/Long*1pcs
Drill Sleeves:
φ1.8mm*1pcs
φ2.0mm*1pcs
φ2.3mm*1pcs
Four guid – pins and three drill – sleeves make surgery
Can easily make a hole for parallel implantation.
Pilot drill (dia 1.8 to 2.0mm) is available.
All parts are autoclavable.
Advantages:
1. Parallel planting arrangement;
2. Simple operation to achieve good prosthetic effect;
3. Can be directly disinfected;
4. Suitable for any implant system;
5. Reduce surgical time.
Usage：
1. Mark the planting site;
2. Drill holes on the jawbone using a guided drill bit to ensure the ideal axial direction;
3. Insert the guide rod into the bone hole drilled by the guide drill bit;
4. Use parallel planting aids for parallel drilling of other bone holes. If necessary, the guide rod can be changed to the other side of the guide arm, so that it can be interchanged left and right;
5. Finally, prepare the bone cavity according to different implant systems.
Attention:
1. There are two specifications of guide rods, S and L, with a diameter of 1.9mm. It can be swapped up and down to meet the needs of different positions on the left and right.
2. The minimum distance that can be reached between the guide rod and the drilling hole is 6mm, and the maximum distance is 88mm.
3. The drilling design is suitable for 2.0mm drill bits.