Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step: 0.1V) for usage with servos & other devices require different voltages. A separate PRG/FAN port is able to power an external fan to maximize cooling performance or connect an LCD program box or WiFi module to the ESC. Variable frequency regulation of PWM & brake frequencies allows users to precisely regulate the driving & braking forces (of the motors). Multiple protections: low-voltage cutoff protection, ESC and motor thermal protection, and fail-safe (throttle signal loss protection), reverse polarity protection (the external standard cap pack will still be damaged if battery reversal occurs). Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real-time. Firmware upgrade via Hobbywing multifunction LCD program box or OTA Programmer (item sold separately)
Specifications ID Xerun XD10 PRO ESC - Drift Application 1/10th drift car Cont./Peak Current 100A/800A Input Voltage 2S LiPo/4-6S NiMH BEC Output 5-7.4V Adjustable, Continuous Current of 5A (Switch-mode) Wires & Connectors Standard: 13AWG 200mm Programming device LCD program box OTA programmer (available through Firmware update) Firmware LCD Program box via USB software (PC only) OTA (iOS / Android) Size & Weight 40.7x35.0x32.0mm (w/Fan) Weight 95g (w/ wires) Motor Limit* Brushless Motor Limit with 2S LiPo/6S NiMH: 8.5T
What comes in the box?
XD10 PRO ESC w/ a cooling fan (2) Input wires & (3) Output wires -PRE-SOLDERED- (2) x cooling fan (comes with one backup fan) Decals Bonus parts: heat tubes, double tape, nylon cable zap traps