with Self Stop,Depth 0-40mm 48-6

The machine has added the function of automatic start and stop, through the contact switch installed inside the
machine, the main switch of the machine is opened, and the drill will start to rotate when the working handle is pressed.

Advantage:
1.Portable hinge drilling machine, small body, easy to carry and move.
2.Thickened and enlarged table, easy to use, ensure success rate.
3.High quality combination drill, drill bit can be changed at any time.
4.Air spring rubber compression device to easily secure the board.
5.The scale control is accurate to reduce the error rate.
6.Adjust the position of the positioning baffle at will
according to the scale as needed.
7.High-strength spring, thickened material, not easy to deform.
8.Built-in contact switch, when the working handle is pressed down, the drill begins to rotate.

Precautions For Use：

1.Before operation, check whether the power cable is properlyconnected, whether the protective device and the pressing
device are complete, and whether the components are normal.
　

2.The operating position should be bright and without shadow.
　

3.The drill should be centered, balanced and sharp.
　

4.This machine is mainly used for wood punching processing(thin aluminum can also be), and the selection of materials
can not have nails, screws and other tools damaged or blunt foreign bodies.
　

5.Hands should not touch the rotating parts of the machine tool during operation, and the wood chips should not be
removed during operation. The power supply must be cut off before adjusting or removing the wood chips, and can only be
carried out after the machine tool stops working.
　

6.Stop the machine immediately if anything abnormal is found.