Compact Low Profile Load Cell 5000N Capacity Amplified Voltage Output W CAN bus
Product Description: Compact Low-Profile load cells are fully stainless steel hermetically sealed load cells with a multi-beam internal structure and fully integrated electronics to provide high-level analog or digital outputs. This type of load cell is easy to use for measuring tension or compression loads from 200N (50lb) to 5kN (1000lbf) and is capable of rejecting side forces that would otherwise affect accuracy. This type also offers the user the ability to set the gain and offset (span and zero) electronically to provide maximum flexibility for the user application.
For detail specification, please visit: Compact Low Profile Load Cell (SGCLP) - SGSENSE (sgsensetech.com)
Specification
| Parameter | Range | Notes |
|---|---|---|
| Rated load | 200, 500, 1000, 2000 & 5000N 50, 100, 200, 500 & 1000lbf |
|
| Proof load | 150% of rated load | No effect on calibration |
| Ultimate load | 200% of rated load | No structural failure (deformation only) |
| Deflection | <0.05 mm | Depends on rated load |
| Natural frequency | >1000 Hz | Depends on rated load |
| Output at rated load (RO) | 1-9 V or 4-20mA or CAN or RS485 or mV/V | Select when ordering |
| Non-linearity | <= 0.1% RO | |
| Hysteresis | <= 0.1% RO | |
| Repeatability | <= 0.03% RO | |
| Creep over 20 minutes | <= 0.03% RO | |
| Output (span) tolerance | factory setting ±0.1% range ±50% RO | Adjustable via electronic interface. See user manual for details |
| Offset (zero balance) | factory setting ±1.0% range ±50% RO | Adjustable via electronic interface. See user manual for details |
| Output (span) temp coefficient | ±0.005% load / °C | |
| Offset (zero) temp coefficient | ±0.005% RO / °C | |
| Compensated temp range | -10°C to +50°C | |
| Operating temp range | -40°C to +85°C | |
| Power supply | 12 to 24 VDC <40mA | |
| Insulation resistance | >=5 Gohm @ 50 VDC | |
| Connector | Analog O/P: 8-pin M12 male hermetic Digital O/P: 5-pin M12 male hermetic |
ESD safe EMC compliant with EN61326-2-3:2006 CE marked |
| Protection class | IP68 | Fully stainless-steel construction laser welded |
| Weight | 750 g | |
| Bridge resistance | 700 Ohms Nom. |
Dimensions
Dimensions – mm [inch]
| Capacity (N) | Centre thread size (through) | Outer bolt size |
|---|---|---|
| 200, 500 | M8 x 1.25 | M6 Socket Head Screw |
| 1000, 2000, 5000 | M12 x 1.75 | M6 Socket Head Screw |
| Capacity (lbf) | Centre thread size (through) | Outer bolt size |
|---|---|---|
| 50, 100, 200, 500, 1000 | 3/8-24 UNF-2B | ¼” Socket Head Screw |
Wiring Codes
| Pin | Voltage Output | Current Output | CAN | RS485 | mV/V |
|---|---|---|---|---|---|
| 1 | Supply (+) | Supply (+) | Shield | Supply (+) | Supply (+) |
| 2 | Supply (-) TEDS GND | Supply (-) TEDS GND | Supply (+) | RS485_A | Supply (-) |
| 3 | Signal (+) | Current loop (+) | Ground | Ground | Signal (+) |
| 4 | Signal (-) | Current loop (-) | CAN_H | RS485_B | Signal (-) |
| 5 | TEDS DATA/ Shunt calibration (Optional) | TEDS DATA/ Shunt calibration (Optional) | CAN_L | Shield | N/A |
| 6 | Calibration interface A | Calibration interface A | N/A | N/A | N/A |
| 7 | Calibration interface B | Calibration interface B | N/A | N/A | N/A |
| 8 | Calibration interface C | Calibration interface C | N/A | N/A | N/A |
| 9 |  |
|
 |
|
|
Order Details
Model (Capacity in N)
| Model | Capacity (N) | Description |
|---|---|---|
| 1010-10 | 200 | 1 mV/V Output. With M12H connector (hermetic) |
| 1020-10 | 500 | 1 mV/V Output. With M12H connector (hermetic) |
| 1030-10 | 1000 | 1 mV/V Output. With M12H connector (hermetic) |
| 1040-10 | 2000 | 1 mV/V Output. With M12H connector (hermetic) |
| 1050-10 | 5000 | 1 mV/V Output. With M12H connector (hermetic) |
| 1010-20 | 200 | Amplified Output (4-20mA). With M12H connector. |
| 1020-20 | 500 | Amplified Output (4-20mA). With M12H connector. |
| 1030-20 | 1000 | Amplified Output (4-20mA). With M12H connector. |
| 1040-20 | 2000 | Amplified Output (4-20mA). With M12H connector. |
| 1050-20 | 5000 | Amplified Output (4-20mA). With M12H connector. |
| 1010-30 | 200 | Amplified Output (1-9V). With M12H connector |
| 1020-30 | 500 | Amplified Output (1-9V). With M12H connector |
| 1030-30 | 1000 | Amplified Output (1-9V). With M12H connector |
| 1040-30 | 2000 | Amplified Output (1-9V). With M12H connector |
| 1050-30 | 5000 | Amplified Output (1-9V). With M12H connector |
| 1010-40 | 200 | Amplified Output (CAN/RS485). With M12H connector |
| 1020-40 | 500 | Amplified Output (CAN/RS485). With M12H connector |
| 1030-40 | 1000 | Amplified Output (CAN/RS485). With M12H connector |
| 1040-40 | 2000 | Amplified Output (CAN/RS485). With M12H connector |
| 1050-40 | 5000 | Amplified Output (CAN/RS485). With M12H connector |
Model (Capacity in lbf)
| Model | Capacity (lbf) | Description |
|---|---|---|
| 1110-10 | 50 | 1 mV/V Output. With M12H connector (hermetic) |
| 1120-10 | 100 | 1 mV/V Output. With M12H connector (hermetic) |
| 1130-10 | 200 | 1 mV/V Output. With M12H connector (hermetic) |
| 1140-10 | 500 | 1 mV/V Output. With M12H connector (hermetic) |
| 1150-10 | 1000 | 1 mV/V Output. With M12H connector (hermetic) |
| 1110-20 | 50 | Amplified Output (4-20mA). With M12H connector. |
| 1120-20 | 100 | Amplified Output (4-20mA). With M12H connector. |
| 1130-20 | 200 | Amplified Output (4-20mA). With M12H connector. |
| 1140-20 | 500 | Amplified Output (4-20mA). With M12H connector. |
| 1150-20 | 1000 | Amplified Output (4-20mA). With M12H connector. |
| 1110-30 | 50 | Amplified Output (1-9V). With M12H connector |
| 1120-30 | 100 | Amplified Output (1-9V). With M12H connector |
| 1130-30 | 200 | Amplified Output (1-9V). With M12H connector |
| 1140-30 | 500 | Amplified Output (1-9V). With M12H connector |
| 1150-30 | 1000 | Amplified Output (1-9V). With M12H connector |
| 1110-40 | 50 | Amplified Output (CAN/RS485). With M12H connector |
| 1120-40 | 100 | Amplified Output (CAN/RS485). With M12H connector |
| 1130-40 | 200 | Amplified Output (CAN/RS485). With M12H connector |
| 1140-40 | 500 | Amplified Output (CAN/RS485). With M12H connector |
| 1150-40 | 1000 | Amplified Output (CAN/RS485). With M12H connector |
Note for the valuable customers:
Free shipping is provided. Please contact the seller for higher quantities.
Product has been designed, developed and manufactured under AS9100 Quality Standard.
We are shipping from Sri Lanka:
Express shipping with UPS/FedEx/DHL (5-7 working days)
Processing time is 10 working days.
Our Motto
Precision, Repeatable, and Reliable Measurement Solutions..!
| 0.08mm [.003”] |