Name: NC-3241 Nut Cutter
Output: 20T
Bolt range: M22-M27
Hex nut range: 32-41mm
Packing size: 32*14*23cm
Name: NC-2423 Nut Cutter
Output:15T
Bolt range: M16-M22
Hex nut range: 24-32mm
Name: NC-1924 Nut Cutter
Output:10T
Bolt range: M12-M16
Hex nut range: 19-24mm
Name: NC-1319 Nut Cutter
Output: 5T
Bolt range: M6-M12
Hex nut range: 10-19mm
Features:
1, rust nut is easily removed
2, compact design is easy to use
3, explosion-proof environment is available
4, the spring automatically resets
5, unique angle head design, special steel heavy cutting head
6, split hydraulic design, equipped with ZG3/8 quick connector and dust cap, can be connected to
any hydraulic pump with output pressure up to 70 MPa
Instructions:
1. Open the oil filling screw plug, fill the manual oil pump box with 20# oil, or hydraulic oil, and close
the unloading valve;
2. Insert the head hole of the cutter into the nut to be broken and straighten it;
3. Press the manual oil pump to push the boring tool out to the nut. When the boring tool is pushed
into the nut by one-half, the hand pump should be carefully pressed to avoid excessive force. The
boring tool quickly breaks the nut and damages the bolt wire. buckle;
4. When the cracking sound is heard, it indicates that the nut has been broken, that is, the pressing is stopped;
5. Unscrew the unloading valve, return to the original position after the boring tool, and remove the cleaver.
