for Ford Engines:  
for Ford 4.9 L 300 cu
for Ford 4.1 L 250 cu
for Ford 3.3 L 200 cu

for Ford Broncos, for Ford Fairmont, for Ford Granada, for Ford F100, F150, F250 & F350   
for Ford Econoline E Series E-100,E-150,E-250, E-350 1965-1985

Note: Replace for YFA Carb, 1-Barrel, Electric choke

Reference OE Part numbers

CA-7051, CA-1270, 16010-FD300, 16010FD300

Specification

Materia:Aluminum Alloy
Vehicle Service Type:PIck up
Choke Type:Electric Choke
Barrel Count:1
Mounting Flange Type: Bolt On
Fuel Type: Gasoline
Bolt Hole Spacing Length & Width:75mm (Center To Center) 
Intake Side Diameter:42.8mm
Air Filter Side Inner Diameter:48mm
Air Filter Side Outer Diameter:66mm 
Venturi Diameter:34mm

Package Included:

1x Car Carburetor for Ford

Condition: 100% Brand New

Accessories: You will get exactly as shown in the picture above

Description

1. Carburetor structure:  Components of Carburetor usually include a storage chamber for liquid fuel, a choke, an idling (or slow-running) nozzle, a main nozzle, a venturi-shaped air-flow restriction, and an accelerator pump. The quantity of fuel in the storage chamber is controlled by a valve actuated by a float.

2. Carburetor is a kind of oil supply device in the engine of automobile，The goal of a carburetor is to mix just the right amount of gasoline with air so that the engine runs properly. 
In the middle of the air intake channel of carburetor is a narrow throat.
The air absorbed by acceleration engine will produce venturi effect to suck out, atomize and mix the fuel in the thin pipe.

3. Main Function: The goal of a carburetor is to mix just the right amount of gasoline with air so that the engine runs properly. If there is not enough fuel mixed with the air, the engine ""runs lean"" and either will not run or potentially damages the engine.

4. How to clean the carburetor:
（1） Close the fuel valve, remove the hose, loosen the screw, and remove the carburetor;
（2） Unscrew the screw at the bottom of the carburetor, remove the float bowl, and then use a tool to pull out the float pin to remove it
（3） Unload the nozzle
（4） Unscrew the air screw and idler screw on the side, and remove the external parts
（5） Clean the parts with detergent
（6） After cleaning, install the float needle and fuel splash plate first, and then install the nozzle and splash plate.
（7） Install external parts and floats
（8） Install the carburetor

Feature:

1. YFA 1-barrel, automatic choke, auto & manual transmissions. Add 5~10% horsepower and maintain near stock fuel mileage, improve throttle response for better engine performance.
2. 100% tested For reliability and performance.simple installation and and long life as a guarantee
3.  Brand New Manufactured with New Premium Quality Components
4. 2 year warranty，Fit and Quality Guaranteed，Backed by satisfying after-sales service。
5. Common Symptoms of a Bad or Failing Carburetor: （1） Reduced engine performance; （2） Black smoke from exha-ust; （3） Backfiring or overheating; （4） Hard starting;
 Since it is the component directly responsible for providing the fuel and air needed for the engine to run, the carburetor is one of the most important components on any vehicle equipped with one, and any problems with it can greatly affect the drivability and performance of the vehicle; it is necessary to replace failed Carburetor in time
 

NOTE:
* The oil channels of carburetors will be blocked without cleaning.
* Please clean up the oil channels and air filters as well as use the clean fuel before installing the carburetors
* Please confirm your old part number matches up with one of the part numbers above
* Professional installation is highly recommended (No Instruction Included)