Headlight Bulbs Specifications:
Bulb Socket: 9005/HB3 high beam + H11 low beam
Operating Voltage: DC 9V ~ 32V , Fit for 12V / 24V vehicle.
Wattage: 100W per bulb
Luminous Flux: 10000 LM per bulb
Color temperature: 6000K
Light color: Cool White
Material: Aviation 6063 aluminum profile
Beam Angle: 360 degree
Operating Temperature: -40 - +80 degree Celsius
Waterproof Rate: IP67 rated Waterproof and dust seal, works well even in extreme weather
Lifespan: over 50000 hours life time, stable quality and long service life
Application: headlight high beam + low beam
Built-in constant current CPU,instant full brightness without start-up relay
Easy plug and play design, no resistor or modification needed.
Fog Light Bulbs Specifications:
Bulb Socket: 5202/H16
Chip Type: 3570 CSP chips
Technology: Bulit in driver
Operating Voltage: DC 12V ~ 24V, Fit for 12V & 24V vehicle.
Wattage: 50W per bulb
Luminous Flux: 5000lm per bulb
Color temperature: 6000K
Light color: Cool White
Material: Aluminum profile
Operating Temperature: -40-80 degree Celsius
Waterproof Rate: IP67 rated Waterproof and dust seal
Lifespan: over 50000 hours life time, stable quality and long service life
Built-in constant current CPU,instant full brightness without start-up relay
Easy plug and play design, no resistor or modification needed.
Package Included:
2pcs 9005 Headlights High Beam
2pcs H11 Headlights Low Beam
2pcs 5202 H16 Fog Light
New and old boxes are shipped randomly
Feature:
1. High brightness: The latest with 6000K White CSP chip; 600% brighter than the existing halogen headlights.
2. Simple Installation: Installation only takes 10 minutes. There is no relay. There is no capacitor. No additional wiring. Plug and play.
3. IP67 waterproof: using integrated radiator and aluminium body self-cooling, waterproof and heat-proof. Even in extreme cases, the enclosure of the rainproof driver can work properly. Automatic short circuit protection.
4. Luminous on all sides: 360 ° no dead angle
Installation Guide:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Attention:
For a few newest years make cars(About 0.1%) ,Germany Cars,Cars and DRL Model may need add Load Resistors(Not including) to stop flickering Issue or fix error message )
Any questions,pls contact us by e-mail before leaveing negative feedback,thanks!