J-type thermocouple to voltage module

This is a linear conversion module with cold end temperature compensation, which is processed by an internal chip to convert the input thermocouple signal into a temperature (voltage signal) output.

There are two output voltage range options available.

Module parameters

1. Working voltage: 9V~24V

2. Input: J-type thermocouple

3. Output voltage: 0.00V~5.00V/0.00V~10.00V

4. Temperature measurement range: -100 to+1000 degrees.

5. Output method: J1 pad on the circuit board: open circuit (output 0.00V~5.00V); Short circuit (output 0.00V~10.00V), default is open circuit.

6. Application scope: Remote data collection and control equipment;

7. Dimensions: (length) 26mm * (width) 23mm * (height) 10mm

8. Module interface:

24V: Power positive terminal interface (9V~24V).

G: Power ground interface.

I+: thermocouple positive electrode interface.

I -: Negative electrode interface of thermocouple.

OUT: The output interface of the signal (0.00V~5.00V/0.00V~10.00V).

G: Power ground interface.

Attention: When outputting 0.00V~10.00V, the power supply voltage should be 15V.

Output (0.00V~5.00V) Resolution: 0.00454545V/℃ (volts/degrees Celsius)

Output (0.00V~10.00V) resolution: 0.00909090V/℃ (volts/degrees Celsius)

The formula for calculating the measured temperature is: (output voltage (V)/resolution) -100 ℃=measured temperature (℃).