|
Front Wheel Drive Medium and Long Wheelbase Models Only - Black Filler Fresh Tank - Hatch - Nut in Fittings - Brackets and fixings - Black Filler
|
This fresh tank is designed to fit with the long side running front to back of the vehicle, in the space where the spare wheel goes. Spare wheel needs to be removed and spare wheel winch unbolted. The tank sits very slightly offset to passenger side, behind the axle, in the spare wheel position (spare wheel position is not central), in the recess between the cross members. Capacity of 73 litres.
Fixing kit supplied with 2 brackets, 4 x 4 inch hookbolts and locking nuts.
Front bracket will need 2 holes drilled into the rear face of front cross member and bolted using a 4 inch hookbolt either side.
Rear bracket will also need 2 holes drilled into front face of rear cross member and bolted using a 4 inch hookbolt either side.
Hatch and three nut in fittings included: 1 x 40mm elbow inlet, 1 x 12/13mm barbed straight for pump outlet and 1 x 25mm straight (1") for the drain. Hatch must be fitted to the top face of the tank. Fittings can be placed wherever you want. Use hatch opening to gain access for fittings.
Recommend the use of smooth bore supaflex hose which is ultra flexible.
This tank can also be used for waste. See separate listing.
KIT CONTAINS:-
- 1x CAK-025FNB Fresh Water Tank 73 Litre with 3 pre-installed breathers
- 1x hatch and 3x nut in fittings (1 x 40mm elbow inlet, 1 x 12/13mm barbed straight for pump outlet, 1 x 25mm straight fitting for the drain)
- 1x Set of custom made steel brackets. (Recommend painting with metal paint prior to installation)
- 1x Set of hook bolts for brackets with locking nuts
- 1x 1 metre Remote Drain Tap Kit (Blue)
OPTIONALS:-
- 1x Fresh Water Level Gauge with Read out Panel (MTT/G)
- Defrost element (DFE-02)