FRESH WATER SIMPLY TASTES BETTER. 
** Keeping your refrigerator in tip top shape with a brand new water filter is a smart move.  
** By changing your LT1000P / LT1000PC water filter on a regular basis, you'll continue to reduce contaminates such as iron, particulates  
and chlorine in your dri nking water and ice cubes. You'll notice the difference! 
** It is essential that the manufacturer's recommended installation, maintenance and filter replacement requirements be carried out for the product to perform as ** advertised.  
** This is 100% Genuine LG Original part.  
** The LG LT1000P / LT1000PC Replacement Refrigerator Water Filter (part# MDJ64844601) is compatible with the following LG refrigerators 
-
GF-D708BSL 
GF-D708MBSL 
GF-L570MBL 
GF-L570PL 
GF-L677SL  
GF-L708PL 
GF-V570MBL 
GF-V708BSL 
GF-V708MBSL 
GF-V910MBSL 
SG-5I700TSL  
-
LFXC24796D 
LFXC24796S 
LFXS30796D 
LFXS30796S 
LMXC23796D 
LMXC23796S 
LMXS30796D 
LMXS30796S 
LSFXC2496D 
LSXC22396D 
LSXC22396S 

LSXS26396S

INSTALLATION

1. Remove the top shelf.

If the top shelf, which is located below the water filter, is in the highest position, it will need to be removed. This can be done in two simple steps:

- Tilt up the front of the shelf and lift it.

- Pull the shelf out.

2. Remove old water filter.

Pull the old water filter downward and turn it counter-clockwise to pull it out. 

Make sure to rotate the filter down completely before pulling it out of the manifold hole.

3. Install new water filter.

Take a new water filter out of its packaging and remove the protective cover from the o-rings. 

With the filter tabs in the horizontal position, push the new filter into the manifold hole, rotate it up into place, and close the cover.

4. Remove trapped air.

Now that the filter is replaced, dispense 2.5 gallons of water to remove trapped air and contaminants from the system. 

Depress and release the dispenser pad for cycles of 30 seconds ON and 60 seconds OFF, rather then dispensing continuously.



If your model is equipped with a water filter indicator on the display, press and hold the FILTER button 

or RESET button for approximately 5 seconds to reset the filter indicator.