10-Inch Classic Retro Style Tri-Color Stripe Decal Sticker For Toyota/Lexus, etc
10-Inch Classic Retro Style Tri-Color Stripe Decal Sticker For Toyota/Lexus, etc
Features
For all Toyota Tacoma Tundra 4Runner FJ Cruiser RAV4 Hilux Highlander Sequoia Land Cruiser, Also For Lexus GX LX, etc
1 piece Size: 10" x 6" (10" x 2" for each color) classic retro style three colors self-adhesive stripe decal
Made with high quality reflective KK vinyl paper with glossy coating over
"Good for both exterior or interior decoration use such as grille, bumper, windows, fender, hood, side skirt, side mirror, rim, front/rear lip or spoiler, dashboard, inside trims, center console, etc .
Super easy to install: thoroughly clean the surface , wait till it is completely dry, and then peel-N-apply the badges, stick on to the places you like
Description
This page features a brand new set of 10-Inch Classic Retro Style Tri-Color Stripe Decal Sticker Fit For Toyota/Lexus Exterior or Interior Decoration Grille Fender Hood Side Skirt Bumper Side Mirror Dashboard, etc.
Package Include: 1 Pcs
Features
For all Toyota Tacoma Tundra 4Runner FJ Cruiser RAV4 Hilux Highlander Sequoia Land Cruiser, Also For Lexus GX LX, etc
1 piece Size: 10" x 6" (10" x 2" for each color) classic retro style three colors self-adhesive stripe decal
Made with high quality reflective KK vinyl paper with glossy coating over
"Good for both exterior or interior decoration use such as grille, bumper, windows, fender, hood, side skirt, side mirror, rim, front/rear lip or spoiler, dashboard, inside trims, center console, etc .
Super easy to install: thoroughly clean the surface , wait till it is completely dry, and then peel-N-apply the badges, stick on to the places you like
Description
This page features a brand new set of 10-Inch Classic Retro Style Tri-Color Stripe Decal Sticker Fit For Toyota/Lexus Exterior or Interior Decoration Grille Fender Hood Side Skirt Bumper Side Mirror Dashboard, etc.
Package Include: 1 Pcs
Attention: It is normal to find wrinkles or bubbles on the stickers upon receipt, and it will not affect installation and use. Because our stickers are made of vinyl material, they become soft when heated. Heating them during installation will remove wrinkles and achieve the best installation effect.
Installation steps:
1. Clean the car body and remove any oil, water, or dust from the surface.
2. After determining the installation position, fix the sticker on the car with tape to prevent any movement during installation.
3. Use a hot air gun or hair dryer to heat the sticker and make it soft.
4. Peel off the protective film of the adhesive while using a plastic scraper or bank card to scrape the sticker flat, eliminating bubbles and wrinkles.
