Genuine VELCRO® PS14 White/Black Self Adhesive Coins Dots Stick On Various Sizes
The VELCRO® Brand
Video will open in a new window
Using the eBay App? Paste link into a browser window:
Genuine VELCRO® PS14 White/Black Self Adhesive Coins Dots Stick
**Please Note - You will receive EITHER the hook OR loop OR both Velcro elements depending on the option you selected at the point of order
**This item is a bespoke cut length and is not supplied on a reel or in retail packaging
**Simply choose your desired colour, size, part and quantity from the drop down options. Easy!
VELCRO® brand stick-on hook (rough to touch) and loop (soft to touch) coins with a rubber resin adhesive to the rear, ideal for most surfaces, including paper, card, rigid plastic, glass and metal, except PVC and anything containing plasticizers.
Use VELCRO® Brand Stick On coins as a quick and easy alternative to nails, screws and glue. These coins are perfect for securing items in place around the home, school or workplace.
Make sure both surfaces are clean and dry before use. Allow at least 10 minutes for the adhesive to set before use, full adhesion at 24 hours after install.
Pressure sensitive adhesives are popular because of their ease of application - simply remove the release liner and press the coin in place.
General Recommendations
Environmental conditions - Your work area must be clean and free from dirt and dust in the air. It is also essential to have a well ventilated area when using solvent activated adhesives. Ideal room temperatures should be 18 ºC to 20 ºC, and relative humidity 40% to 60% (the lower the humidity, the better the bond). If the adhesive is applied below the recommended application temperatures, it loses tack. Once adhesive or self-adhesive tape is applied, press it firmly into contact with the substrate to smooth tape and to avoid air bubbles.
Surface preparation - It is mandatory that all surfaces should be thoroughly cleaned and dried. All cleaning agents should be tested prior to use to ensure cleaning agent will have no adverse effects on the substrate.
Porous substrate - This type of surface is one that requires a primer or sealer to provide a suitable bonding area. This could consist of a coating or a liquid adhesive. Allow to dry prior to final adhesive procedure.
Non-porous substrate - This would be suitable for solvent activation of a VELCRO® Brand pre-coated adhesive backing tape. Better adhesion can be obtained when used with a liquid adhesive.
Smooth surfaces - Superior bonding can be achieved by cleaning or roughing up a smooth surface.
Limitations - Not recommended for use in water or on plastics with high concentrations of plasticizers. Adhesives are not washable or dry cleanable.
Suitability - Before using adhesives for production user should test the adhesive to determine the suitability of the product for the intended use
Application Instructions
1. Clean and dry surface before application
2. Peel tape from fastener and press firmly into place
3. Adhesive reaches maximum strength after 24 hours
VELCRO® brand stick-on hook (rough to touch) and loop (soft to touch) coins with a rubber resin adhesive to the rear, ideal for most surfaces, including paper, card, rigid plastic, glass and metal, except PVC and anything containing plasticizers.
Use VELCRO® Brand Stick On coins as a quick and easy alternative to nails, screws and glue. These coins are perfect for securing items in place around the home, school or workplace.
Make sure both surfaces are clean and dry before use. Allow at least 10 minutes for the adhesive to set before use, full adhesion at 24 hours after install.
Pressure sensitive adhesives are popular because of their ease of application - simply remove the release liner and press the coin in place.
Environmental conditions - Your work area must be clean and free from dirt and dust in the air. It is also essential to have a well ventilated area when using solvent activated adhesives. Ideal room temperatures should be 18 ºC to 20 ºC, and relative humidity 40% to 60% (the lower the humidity, the better the bond). If the adhesive is applied below the recommended application temperatures, it loses tack. Once adhesive or self-adhesive tape is applied, press it firmly into contact with the substrate to smooth tape and to avoid air bubbles.
Surface preparation - It is mandatory that all surfaces should be thoroughly cleaned and dried. All cleaning agents should be tested prior to use to ensure cleaning agent will have no adverse effects on the substrate.
Porous substrate - This type of surface is one that requires a primer or sealer to provide a suitable bonding area. This could consist of a coating or a liquid adhesive. Allow to dry prior to final adhesive procedure.
Non-porous substrate - This would be suitable for solvent activation of a VELCRO® Brand pre-coated adhesive backing tape. Better adhesion can be obtained when used with a liquid adhesive.
Smooth surfaces - Superior bonding can be achieved by cleaning or roughing up a smooth surface.
Limitations - Not recommended for use in water or on plastics with high concentrations of plasticizers. Adhesives are not washable or dry cleanable.
Suitability - Before using adhesives for production user should test the adhesive to determine the suitability of the product for the intended use
Features
Rubber-based - Rubber-based pressure sensitive adhesives have good adhesion to low surface energy substrates. They should be used indoors, at room temperature.
Sturdy PS14 Rubber Resin Adhesive.
Easy peel off the backing paper and use.
VELCRO® Brand Sticky Back Coins are a quick and easy solution for organising & connecting frequently used items
Simple peel and stick application
Adheres to smooth surfaces
Durable long lasting nylon construction
Perfect for everyday indoor applications
Uses
VELCRO® Brand coins are widely used for home decor applications, crafts, schools and colleges they are also used widely in the exhibition, display and packaging industry
Item Specification
BASE MATERIAL: Rubber resin
TEMPERATURE RANGE: -15 ºC to +90 ºC
PEEL AVERAGE: 17 N/cm (curing time: 24 hours)
SOFTENING POINT: 90 ºC
STATIC SHEAR: 7 days
TACK: Medium
APPLICATION METHOD: Pressure
APPLICATION: See chart below
SPECIAL FEATURES: High cohesion under temperature.
Colour Options:
Black
White
Part Options:
Hook only
Loop only
Hook AND Loop Kit
Diameter Options:
13mm
22mm
35mm
45mm
Quantity Options:
Single Sample - 45mm Black kit only
5
10
20
50
100
200
500
Recommended Application Substrates for Optimal Adhesion.
