The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
Product Name: diamond tip drill bit, glass hole saw bit, glass drill bit
Hole Diameter: 2-6 mm ( Please select the Hole Diameter which you need )
Hole
Diameter
Outer
Diameter
Inner
Diameter
Shank
Diameter
Rim
Thickness
Total
Length
Drilling
Depth
Quantity
2mm (0.08")
2.5mm (close
to 3/32")
2.0mm
2.6mm
0.4
0.6
2.35
2.35
0.6
0.8
41
42
3
4
20 Pieces
20 Pieces
3mm (less than
1/8")
3.1mm
1.4
2.65
0.8
42
5
20 Pieces
4mm
(5/32")
4.2mm
2.4
3.5
1
50
15
20 Pieces
5mm (bigger
than 3/16")
5.2mm
3.2
4.5
1.1
50
15
20 Pieces
6mm (less than
1/4")
6.2mm
4
5-5.5
1.1
50
20
20 Pieces
Quantiy: Only 20 Pieces
Shank Diameter: 2.3-5.5mm
Total Length: 41-50 mm
Drilling speed: Drill a hole in seconds
Use with water as a lubricant
Quick Tips
1. Please add water for coolant and drill slowly
2. Start drill at 45 Degree to surface and align to 90 Degree as hole forms
3. Never use drills while machine is in hammer action.
4. Holes Require No Futher Work As Cutting Is Clean
How to use a hand drill to drill holes in the glass/tile/stone?
Step 1. The bit on the glass/tile/stone 45 degree, open a half-moon notch on it
Step 2. Slowly up the bit to 60 degrees, and then gently drill
Step 3. Reached 90 degrees, continue to drill
Step 4. Drill through the glass/tile/stone finally, the technique requires a "wobble" of the drill rather that steady pressure straight on
We Can List Any Size( Hole diameter from 0.4mm - 200mm) & Amount of This Product
We will send out your order within 1-2 days after payment has been received and cleared.
