B.C Paints Ltd do it right First Time Every Time
NON SLIP MARINE DECK PAINT
Premium Non Slip Boat & Barge Deck Paint
Non Slip Marine Boat Deck Paint Enamel is a single pack polyurethane based boat enamel designed for use as a refinishing paint for boat and barges. Boat Enamel is based on polyurethane modified resin system which provides a strong, flexible paint film with good chemical resistance. Selection of high quality pigments further enhances the properties by providing improved weathering resistance and light fastness of the coating.
Due to the oil type of T A Paint’s Single Pack Polyurethane Non Slip Marine Boat Enamel, the coatings is able to overcoat a wide range of old coatings without attacking it. We just recommend a light abrasion and degreasing prior to painting.
Key Facts
Can be brushed, roller or spray applied High gloss finish Matt & Semi Gloss avalable in selected colours. Touch Dry 2-4 hours Over coat 12-24 hours Thinners suitable T0001 White Spirit Covers Approx. 8 square metres per litre (this does not account for the method of application, absorption of substrate or wastage) Suitable for Metal, Primed Fiberglass, Wood, Concrete, Brick and Plastisol (12 months old) Shelf life - 12 months from batch dateMake sure you use a mixer on a slow running drill, pallet knife or a broom stick that reaches the bottom of the can and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.
Thinners required are White Spirit T0001. If thinning is required when applying by a brush or roller start by gradually adding 5% but do not thin more an 10% as the paint won’t cover
As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
Application - Painting over existing paint
Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first.
Step 2 Clean and Abrade -
- Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
- If there is flaking paint this must be removed prior to painting.
- For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with the appropriate primer.
- Ensure substrate is clean of any dirt, oil, or grease
Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.
Step 4 Topcoat- Once you have completed the following steps you can apply your top coat.
Application - Painting a bare substrate
Step 1 Clean - Ensure substrate is clean of any dirt, oil, or grease.
Step 2 Prime – Depending on the material you are painting will determine what primer you will need.
Step 3 Topcoat – 12-24 hours after applying the primer you can add your first coat of topcoat. Wait another 12-24 hours and then apply the second coat.
Non Slip Boat & Barge Marine Deck Paint
Non Slip Marine boat & barge deck
paints, more so than other paints, are designed to withstand harsh
environments and unpredictable weather. Boats & Barges need to be
able to function whatever the circumstances are, allong with Non Slip marine paints, and marine
primers, offering a professional finish, they need to have
strong protective qualities.
We at BC Paints have poured years of experience in our unique paint formulas. Our marine paints, primers and top coats all have one thing in common: they represent the industry’s best quality marine paints. Regardless of stress and frequent use, applying our boat & barge paint will ensure you are always protected. Using a paint from our top coats range, as well as our boat primer, will provide you with an all encompassing protective paint solution. Shop the full range of Non Slip marine paints today by BC Paints.
