Application:
Measuring triodes, diodes, resistors, capacitors, inductors, thyristors, field effect transistors, voltage regulators, dual diodes, light-emitting diodes, etc.
The test socket is divided into a transistor test area and a Zener diode test area, among which KAA is a Zener diode test area
Can measure voltage
Built-in lithium battery, long battery life; external 5V power supply or mobile phone USB power supply charging (charging voltage can not be higher than 6V)
Infrared decoding function
Auto Calibration Function
Infrared decoding function:
Aim the infrared remote control at the "IR" test hole of the tester, and press the remote control button
If the tester decodes successfully, it will display the user code and data code, and display the corresponding infrared waveform
If the decoding fails or cannot be decoded, the user code and data code will not be displayed. At this time, if you are on the tester interface, you cannot enter the infrared decoding interface. If you are on the infrared decoding interface, the last successful decoding information will still be displayed
The dot in the upper right corner is used to indicate whether the infrared data of the remote control has been received. Red indicates that the infrared data is being received, and blue indicates that the decoding is successful
Auto Calibration Function:
Short-circuit the three test sockets, short press the multi-function button, and the tester will automatically calibrate; after disconnecting the short-circuit wires according to the prompts during the calibration process, no other operations are required