|
220V Farm Animal Feed Pellet Mill Machine
with 10mm Plate 120-150KG/H 4500W |
|
 |
|
Feed granulator
is widely used in large, medium and small aquaculture, grain feed
processing plants, livestock farms, poultry farms, individual farmers
and small and medium-sized farms, farmers or large, medium and small
feed processing plants.
This machine can
be used alone, and customers who need it can also match it with a straw
cutter for better results. |
|
Note:
1. Before using the
machine, it is necessary to adjust the screw of the pressure roller to
the appropriate position. The pressure roller and the pressure plate
should be closely combined, and the three adjusting screws should be on
the same horizontal plane.
2. Please refuel the fuel
tank before using the machine. The machine should not idle for more than
2 minutes.
3.Double-check the belt
and the screws before operation.
4.Clean up the rest after use to prevent damage to the machine.
5.If the pressure roller cannot rotate normally, please tighten the
screws that control the pressure roller first, and then try to power it
on. If it still does not work, you can appropriately loosen the screws
next to the pressure roller and then tighten them slightly again
(without special tightening)
|
|
Product parameter: |
|
ard pressure plate: |
6MM |
|
Output/h |
120-150KG |
|
power: |
4.5KW |
|
voltage: |
220V |
|
Product body material: |
cast iron |
|
Standard pressure roller: |
Three head press roller |
|
Product size: |
32.67*12.99*30.18in(83*33*76.5cm) |
|
 |
|
Feature: |
|
 |
This machine is equipped with an
enlarged and widened discharge port to prevent feed splashing and
facilitate the collection of feed by customers. |
|
This machine is equipped with a voltage
display, which can visually see whether the voltage is stable. |
 |
|
 |
Adjustable nut Used to
adjust the distance between the pressure roller and the grinding disc.
When making pellets, the nuts on the three sides must be balanced to
avoid damage to the pressure roller and grinding disc.
If the pressure roller cannot rotate normally, please tighten the screws
that control the pressure roller first, and then try to power it on. If
it still does not work, you can appropriately loosen the screws next to
the pressure roller and then tighten them slightly again (without
special tightening) |
|
Enlarge the feed inlet
The machine adopts the design of
enlarged feed port, which makes it more convenient for you to feed and
effectively improves work efficiency. |
 |
|
 |
Here is the filling port, open here to
add engine oil
It is
recommended to add high-quality machine oil or hyperbola heavy-duty gear
oil.（The color of the oil filling plug is random） |
|
The length of feed particlescan be
adjusted here. |
 |
|
 |
The machine is equipped with air
switch, which is safer to use. |
|
Nylon wheels are adopted, which are
more wear-resistant and durable. |
 |
|
 |
After using the machine for a period of
time, the customer needs to add lubricating oil here to lubricate the
grinding chamber (approximately 4-6 months of use) (the lubricating oil
gun and lubricating oil need to be purchased by the customer themselves,
we do not provide them). |
|
The hole here is normal and can be used
for heat dissipation. |
 |
|
Precautions:
|
|
1.When using, it
should be noted that there should be no foreign matter such as stones
and ironblocks in the raw materials. After the pellet machine has been
working continuously for morethan ten shifts, the pressure roller oil
hole, the universal joint oil hole, and the linkage shaft oilhole need
to be filled with high-temperature lubricating grease to make the
pressure roller Goodworking performance and extended bearing life.
2.During granulation, it is strictly forbidden for the pressure roller
to contact with the templateto run idly, and the continuous feeding can
not be interrupted.At the same time, the pressureroller shaft nut is
locked to avoid loosening and damaging the spindle keyway.
3.When granulating, there is no granulation, no discharge, the
template should be removed, andafter opening one by one, some fiber feed
can be added appropriately to restart the granulation.
4.Always check
the tightness of the screws in each part of the machine. If there is oil
leakage inthe gearbox, replace the oil seals in time, and check whether
the bearings in the machine headare short of oil.
5.When the pellet machine is working, do not reach into the feeding
port with your hands. Ifnecessary, use wooden sticks to help feed the
pellets.
6.Before turning on the machine, it is necessary to add less material
before turning on the
machine. When shutting down, leave a small amount
of feed in the machine to prevent the pressroller of the machine from
contacting the template from idling.
7.If the machine is stuck in operation, stop it immediately, press the
pressure roller until thebolt is flat,and then restart the machine.
8.Each time the work is completed, the adjusting pressure roller bolts
must be loosened.
9.Iron or stones cannot be put into the griller.
10.Check the elasticity of the belt, and the bearing frequently. Add oil
in time when it needs to.
|
|
Note:
We suggest that
high-power machines should be directly connected to the main power
supply, as the voltage reaching the machine is stable. If the voltage is
unstable and the current exceeds the rated current of the motor, it is
easy to burn out the starting capacitor.
It is recommended to
directly connect to the power supply as much as possible. If the machine
is not connected to the power supply, different situations may occur,
and the wires are not durable. The wires will gradually burn out over
time.
Our machine is not
equipped with a plug. If you do not know how to operate the wiring
video, you can contact our customer service and we will provide you with the
wiring video. (If there are occasional situations with plugs, it is also
recommended that you remove the plugs when wiring)
|
|
Details: |
|
 |
 |
|
 |
 |
|
Item Number:
1*Chicken Feed Pellet Mill Machine 220V (239173) |
Shipping & Handling Details |
Default Shipping Cost or Free Shipping Information:
▲ Default
shipping cost or free shipping service is only for the customers from
Canada or the lower 48 United States by Canada Post, USPS or the UPS
Ground. Customers from other areas or needs other shipping ways, please
contact us.
▲ Buyers
from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska,
Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there will be extra shipping costs, please contact us for more detailed
information.
▲ Please
make sure your address is valid for both UPS and USPS services. Any
costs incurred because of incorrect or undeliverable address should be
undertaken by buyer.
Handling Time: Shipping
is usually made in 1-3 business days after payments cleared. Orders
are processed from Monday-Friday; Not on the weekends & public
holidays.
Sales tax / Customs duties: Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer.
Damage In Shipping: Email or call us First! We will work with you to get the case resolved in the fastest method. |
Return / Refund |
If
you are not 100% happy with your purchase, please contact Us. Please
don't directly opened a request or case without informing us, or else,
we will do some discounts on the warranty and other sales-services
later on. Hope for your understanding.
Returns & Exchanges
▲ All
returns must be made within 14 days of delivery date. Items must be in
new, unused condition, with all original materials included with the
shipment. A partial refund may be applied for opened or damaged items,
depending on the condition.
▲ Items
returned under the buyer’s remorse: The return shipping fee must be
covered by the buyer; The original shipping cost will also be deducted
from the refund. 15% restocking fee of the items purchase price will be
charged.
▲ Returns that are the result of our seller's error: Buyer will receive a full refund of the item as well as shipping charges
▲ All returns require a RA (Return Authorization) number that will be given
by our seller. Please contact with us at first for more details.
Defective & Damaged Products
▲ If product was received damaged or not as described, please send us some
pictures or videos, so we could well understand your problem, then
solve them for you ASAP. Besides, it's much helpful for us to claim
with UPS, remind our related department to pay much more attention to
packaging later on. Hope for your understanding.
▲ Replacement
or refund of defective or damaged products can only be returned in
exchange for the exact same product, or else, the purchase price will
be refunded back to your original payment method.
▲ If
an item is received damaged, customer service must be contacted within
7 days of receiving your item. All returns require a RA (Return
Authorization) number as above. |
Warranty & Feedback |
▲ 6 months' warranty for the machines, not for the consumables. We stand
behind our products all the item, so even if your warranty period has
expired, you can still seek for service or technical support from us
with low cost.
▲ Any warranty shipping cost to us is responsible by buyer.
▲ Any shipping cost to buyer is responsible by the seller.
▲ We
committee to the customer satisfaction and want to bring you the best
purchase experience. If there is any problems, please contact us ASAP.
If not, please leave us a positive feedback as it's very important for
us. Thanks very much. |
|