Package Include: 1pc 2.4L Gas Frame(Brushed Alum), 1pc Petcock, 1pc Non-Suspension Fork, 1pc Headset, 1pc Crank, 1pc Front Motor Mount
Note:
If buyers' bike rear wheel is with quick release,we suggest buyers do not buy the gas frame unless buyers are professional.
New GT-A with disc brake mounting ports ready on the rear end of the frame;
Brake system: Disc brake and V Caliper brake
Gas motor with 8mm front mount bolts fits on well on the Pedestal mt of CDH gas frame!
CDHPOWER 2.4L Gas Frame
- Requirement on seatpost:27.2mm
- Required for seat post clamp:31.8mm
- Head tube: 150mm;
- Requirement on headset size: 1 1/8";
- Requirement on petcock size: 10*1.0mm
- Bottom bracket 2" diameter;
- Rear Width: 135mm
- 38mm diameter downtube 70 degrees angle V frame.
- The width and Inner Diameter (including depth of screw) of the bottom bracket : 68mmx51.5mm/2.677inx2in
- Note: buyers need know how to fasten the motor on the pedestal mount of gas frame to prevent crack from vibration which maybe caused crack of frame;
- CDHPOWER Reinforced Black bicycle gas frame Built-in 2.4L gas tank Designed for the 2-cycle engines 48cc/66cc/80cc with 40 to 50mm wide front mount stud spacing
- Rear Disc brake bracket and front mount pedestal works well with 8mm gas motor front mount bolts
- Frame made especially heavy duty for gas engine applications Available with 135mm rear frame width for either single speed or multi-speed bikes.
- PLEASE NOTE 1: the best safe speed if racing: 35km/h；
Wide Pedal Crank Kit - 2 inch - One-Piece Crank
1. This product can’t work with pulling start 2 stroke engine kit.
2. Compatible with 1/2 inch pedals.
3. Length of Arm:152mm/5.98 inch
4. The distance between the pedal crank arms is about 185mm/7.283inch
Product Description
1. Wide Pedal Crank Kit - 2 inch - One-Piece Crank
2. Are required for 2-storke kick start engine kit
3. Good quality
