BFT sliding gate drive Deimos-Ultra-Kit 600kg with many accessories gate opener

Description

BFT DEIMOS ULTRA BT A600 M kit for sliding gates up to 600 kg

The DEIMOS ULTRA BT A drive allows a wide range of installation options thanks to the extremely low position
of the pinion, the compactness of the output and its height adjustment .
The adjustable electronic speed limiter
guarantees safety against crushing. Manual emergency operation
is easy with a release lever.
Stopping is controlled by polarized magnetic limit switches.
The MERAK control panel is supplied by the manufacturer with the default settings
. Thanks to this modification, the parameters set with the display programmer
or the universal portable programmer can
be modified.
Supports EELINK and U-LINK protocols.
The main features are:
- control of a low voltage motor
- obstacle detection
- separate inputs for the safety devices
- configurable control inputs
- integrated rolling code radio receivers with transmitter cloning

Proximity limit switches for accurate and safe installations in all environmental conditions
Front screws: This arrangement of the housing fixing screws guarantees easy and convenient installation and maintenance, even in confined spaces.
Lever unlocking with personalized key: Lever unlocking simplifies engine release; the personalized key is unique and therefore offers more security.
Control unit with programming display: The Merak control unit with programming display and pre-programmed scenarios helps the installer in the programming phase; the control center is positioned at an angle to make it easier to read the data and enter the settings.

TECHNICAL SPECIFICATIONS

Power supply : 220-230V 50/60 Hz(*) Motor: 24V Power consumption: 70 W Max current consumption: 0.5A (230V) - 1A (110V) Pinion module (standard): 4 mm (14 teeth) Gate leaf speed (standard) : 12m/min Max. gate leaf weight - standard**: 6000 N (≈600 kg) Pinion module (fast): 4 mm (18 teeth) Gate leaf speed (fast): 15.5m/min. Max. weight of gate leaf-fast**: 3600 N (≈360 kg) Max. torque: 30Nm Impact reaction: electronic torque limiter Lubrication : permanent grease Manual maneuver:

mechanical unlocking with lever
Type of use: intensive
Environmental conditions: from -20°C to + 55°C
Degree of protection: IP44
Noise level: <70 dBA
Weight of motor: 7kg

The BFT DEIMOS ULTRA M kit includes:

BFT DEIMOS ULTRA BT A drive with MERAK control
BFT Compacta A20-180 Pivoting photocells (transmitter and receiver)
3 x BFT MITTO B2 2-channel remote control
BFT Radius flashing light LED BT A R1 with antenna
Radio receiver built into the main control panel
Non-contact magnetic switches for closing and opening
2x unlocking keys in case of power failure
Mounting base + anchor
mounting accessories
warranty card
18x 33cm plastic rack, polyamide strips with metal core. (total 6 meters*)

BFT MITTO B2 RCB 2-CHANNEL REMOTE CONTROL

Number of channels: 2
Frequency: 433.92MHz
Code: Dynamic, randomly changing rolling code
Power supply: 12VDC
Range: up to 150 m
Dimensions: 62 x 38 x 14mm

Compacta A20-180

Pivoting photocells (pair), thanks to their compact size, the ability to adjust the head horizontally 90 ° left and right (180 ° total) and a wide input power supply range of 12-33 V AC and 15-35 V DC, a high level offer flexibility during installation. Nominal throughput 20 meters

Radius LED BT A R1 with antenna

Flashing light integrated antenna for motors with 24 V power supply.

Connectivity: No
Voltage: 24V
Integrated antenna: Yes
light: yellow
Protection class: IP44

plastic rack

Plastic rack, cross-section 28 x 28 mm, length 33 cm, fastening with screws in slotted holes, max. loading capacity 800 kg.

Mounting screws included
Reinforced steel core 10mm x 10mm
quiet work
modular