Description
Condition: **Brand New**
This item is 100% authentic and unused.
It will be carefully packed and shipped directly from Japan.
White light FX601-01 Dial type temperature control soldering iron for stained glass (with iron tip 6.5C)
This product is AC100V specification.
If the voltage in your area is other than AC100V, you need a transformer.
Product description
Product introduction
Kame, copper tape, and brass frame can be soldered with this one.
You can select the optimum temperature for work in 6 temperature zones with a click feeling.
By notifying you with the LED that the maximum temperature has been reached, you can always finish cleanly without the temperature being too high and melting the lead came, or the temperature being too low and the solder not spreading well or becoming difficult to melt. Can be done.
From Amazon
● By adjusting the temperature, you can solder the came, copper tape, and brass frame with
just one. ● You can choose the perfect temperature for your work in 6 temperature zones with a click feeling. (Temperature control is performed accurately even in areas where there is no click feeling.)
● You can see the temperature status with the LED. (When it starts blinking, the set temperature is reached)
Explanation by the manufacturer
HAKKO High heat capacity dial type temperature control soldering iron FX601
HAKKO High heat capacity dial type temperature control soldering iron FX601
・ Temperature (MAX) 540 ℃
・ Uses a trowel with a large amount of heat storage
-Suitable for soldering that requires a lot of heat: For high heat capacity soldering such as chassis, large connectors, transformers, etc.
-Excellent thermal conductivity: T19 series with improved thermal conductivity by reviewing the appearance, design and internal structure of the tip. By adopting this tip, a strong heat recovery rate is realized without increasing the power consumption (wattage).
data
HAKKO High heat capacity dial type temperature control soldering iron FX601
HAKKO High heat capacity dial type temperature control soldering iron FX601
・ Test method: Iron tip temperature when soldering ?1.0 × 5mm solder once every 3 seconds
-Substrate used: Paper phenol copper-clad laminate
・ Trowel shape: 5D type
・ Solder used: Lead-free solder
・ Test method: Iron tip temperature when soldering ?1.0 × 5mm solder once every 3 seconds
-Substrate used: Paper phenol copper-clad laminate
・ Trowel shape: 5D type
・ Solder used: Lead-free solder
The manual and packaging are in Japanese.
If you have any questions, please send us a message via eBay.
Payment
・We only accept eBay payments.
・Please pay within 3 days after auction is finished.
・We will ship within 5 business days after receiving payment
except Saturday and Sunday.
・Please update your eBay confirmed shipping address before purchasing an order,
as we can not change it after shipment.
・As for the re-shipment, buyer necessary to pay an additional charge.
Shipping
"economy shipping" is WITHOUT tracking number.
Shipping Duration
*Economy:WITHOUT tracking number
Delivery time
US,AU,Euro & CA: 4 to 7 weeks
Asia: 2 to 4 weeks
If you hurry, please select"Expedited" (2 weeks delivery)
If you're not in a hurry, you don't need to select"Expedited"
if economy shipping is sufficient.
*Standard: e-Packet (WITH Tracking number)
Delivery time
about 2 to 3 weeks
*Expedited: EMS or FedEx (WITH Tracking number)
Delivery time
about 5 to 12 days
Ship to WORLDWIDE!
All buyers is needed to understand post office has possibility of delayed delivery
and lost package.
And we can not guarantee and refund if buyers choose NO tracking method
and post office lost or broke.
"economy shipping" is WITHOUT Tracking Number.
We recommend choose Standard or Expedited if you need tracking service.
Your order would be shipped within 5 business days after the certain payment
(Excluded Saturday, Sunday and the Japanese national holiday) .
We need this handling period for special international secure packaging and paperwork.
Due to accidental circumstance it may exceed standard period,
then you will be informed any unexpected shipping delay.
Please note that delivery delays often occur due to the custom office
at the receiving country side.
We are going to pack your item carefully, and ship immediately.
Please update your eBay confirmed shipping address before purchase an order,
as we cannot change it after shipment.
Returns
Money back guarantee within 60 days if returned by customer.
Customer service and satisfaction are very important to us.
We have an unconditional return policy if notified within 60 days
of the receipt of the item.
All returned items must be the NEW condition.
All return requests must be made within 60 days of the receipt of the item.
If the item arrives damaged or defective, please open a return request through eBay.
International Buyers - Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges.
These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs .
will be prior to bidding/buying.
These charges are normally collected by the delivering freight (shipping) company or
when you pick the item up -do not confuse them for additional shipping charges.
We do not mark merchandise values below value or mark items as "gifts" -US and International government regulations prohibit such behavior.
About US
We want people of the world to know the Japanese good item through ebay.
Our company is an online store selling Japanese item from KOBE Japan to worldwide.
Your satisfaction is our priority.
We promise to offer a pleasant shopping experience to you.
Please do not hesitate to contact us if you have any questions.
We try to satisfy the customer.
A RI GA TO U!