-
ROBUST AND DURABLE
The pump body and impeller are made of brass. The shaft is made of stainless steel. Therefore, this boost pressure water pump has good performance and is durable. The entire pump is well sealed and convey the cleaner water. Household hot water pump increase the pressure of domestic water tanks and maintain a stable pressure.
-
GOOD PERFORMANCE
Stainless steel materials shows better performance on the shield. The stator and rotor are completely isolated inside the pump, and the heat dissipation performance of this power water pumps is good. It can effectively solve the ignition problem of shower due to low pressure and unstable pressure.
-
AUTOMATIC WATER PUMP
Working with low noise, the whole pump is sealed well and the conveyed water will be clean and sanitary. Intelligent dual control system: Automatic control: Start with water, when you don’t need the water, it would automatically close. Manual control: When the water flow is too small, it can be forced to start. Stop: When you don’t need to use it for a long time, you can set the shutdown protection.
-
WORKING LONGER HOURS
The pressure booster pump is designed to be low temperature, small volumn, delicate appearance and long-working time, effectively solving the lit fire properly of shower owing to the lower pressure and unreliable pressure. The pump is used on pipes with acceptable water flow and then can start or stop automatically.
-
EASY TO USE
Small size but having great power to increase domestic water circulating system, perfect for boosting pressure for household water heater. Up to 22psi maximum pressure with booster pump.
-
BOOSTER PUMP FOR HOME
Suitable for high-rise buildings with low water pressure, kitchen and the bathroom, water heater pressurized,household water pressurized, and the solar water heater pressurized. Our water pressure pump especially suitable for water heater pipe pressurization with insufficient water pressure, to prevent water supply from being cold.
Product Description
Please Read It Carefully Before Your Purchase.
Product Summary
| Item Specifics | Value |
|---|---|
| Type | Pump |
| Brand | EVARGC |
| MPN | Does Not Apply |
| Motor wire material | copper |
| Motor shell material | Stainless steel |
| Featured Refinements | Water Booster Pump |
| Rated Power | 100W |
| Rated Head | 12m |
| Rated Flow | 22 L/min |
| Rated Speed | 3000 r/min |
| Insulation | E |
| Rated Voltage | 110V |
| Rated Frequency | 60 Hz |
| Rated Current | 0.4A |
| Capacitance | 3.5 μF |
| Caliber | 15 mm |
Features
Useful, reliable and easy to use;Automatically switch according to the water flow;Brass and stainless steel provides corrosion resistant and more durable;Supply oxygen to the ponds or fish tanks to avoid water pollution;IT Can solve low water pressure in solar or gas water heaters or other domestic water, and prevent the gas water heater from shutting down due to low water pressure;The pump can work continuously and be used for the cooling cycle of industrial equipment such as boilers, welding, food machinery, laser equipment, injection molding machines, air conditioners, etc.
TIPS
You'd better not exceed 40 minutes for one time,or it may affect service life of the pump.Suitable for 2 room(bathroom or kitchen) , 2 to 4 faucets. Connection size: G 3/4" on pump ports, G 1/2" on unions, suitable to 1/2" pipe. A minimum inlet flow rate of 0.6 GPM is required to ensure automatic starting.Installation environmentWater pumps should be installed in a dry environment and not in a closed bathroom. Water vapor will damage and lifeage the electronic components of the product. They must be installed in an area with a floor drain to prevent property losses caused by water leakage.Antifreeze measuresIn winter, the ductility of metal is also weak. When water is about to freeze, the volume increases, and the water pipes and pump chambers may burst. Therefore, antifreeze measures should be taken.
Package And Accessories
- 1x water booster pump
- 1x water flow switch
- 1x Brass fittings
- 1x User manual
- 1x Connect
- 3x Rubber ring
