2148 Radiator for 1998-2002 For HONDA Accord DX EX LX EX-R SE Value Package 2.3L L4
FITMENT:
For 1998-2002 For HONDA Accord DX 2.3L L4
For 1998-2002 For HONDA Accord EX 2.3L L4
For 1998-2002 For HONDA Accord EX-R 2.3L L4
For 1998-2002 For HONDA Accord LX 2.3L L4
For 2000, 2002 For HONDA Accord SE 2.3L L4
For 2001-2002 For HONDA Accord Value Package 2.3L L4
(Not for Models Made in Mexico, Not for 3.0L Models)
NOTE:
1.It will be better if you can check with the above chart to make sure if this radiator will fit your vehicle.
2. The radiator cap that has not passed the test can't release the pressure when it reaches the pressure value.
3. The damaged thermostat is unable to carry out a large cycle, resulting in a continuous increase in the radiator pressure.
4. The radiator fan does not turn, resulting in high temperature in the water tank.
5. After loading the product on your vehicle and adding the coolant, tighten the rotary cover and leave your vehicle idling for 10-20 minutes. After completely cooling the coolant, open the cover and fill the product with coolant. Please make sure there is no gas in the product.
6. Before you start up your vehicle, please make sure there is coolant in the radiator.
FEATURES:
1. The Core was made from high quality Aluminum. Effective Heat Dissipation.
2. Good sealing. All of the new radiators will be inspected before selling (including a 100% leaking test).
3. Radiator is really easy to get damaged during delivery. We have upgraded our package design to avoid this kind of problem.
DETAILS:
Core Material: Aluminum
Tank Material: Plastic
Core Dimension: 26-11/16 '' x 14-3/4''
Core Thickness: 0.63''
Inlet Diameter: 1-1/4 In.
Outlet Diameter: 1-1/4 In.
Row: 1
Oil Cooler: Included
Interchange Part Number: CU2148, 2203, 2148, RAD2148, DPI2148, 19010PAAA51, 19010PAAA53 HO3010101, 19010PAAA01
Radiator Cap: Not included
The Dimension of the Radiator Cap should be: 41mm(Outer diameter) x 9.5mm(Depth).
The pressure value of the new cap should be the same as the old radiator cap.
How to clean radiator:
1. Start the vehicle, to rise to normal temperature. Slowly open the tank cover, the fluid shake from the tank after filling the mouth, the cleaner can be mixed with any brand of coolant. Idle running not less than 15 minutes, not cleaning vehicles not less than 30 minutes for two years. And then discharge coolant, flush water tank, until out of clear water, suitable for any water cycle system.
2. After cleaning, after waiting for pipeline rehabilitation add fluid to water tank, and inject new coolant and water purification.
How to replace the radiator:
1. Disconnect the battery.
2. Drain the radiator fluid into a suitable container.
3. Remove the old radiator:
-Take off any plastic covers around the radiator.
-Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.
-Disconnect the radiator hoses from the radiator.
-Disconnect the transmission cooling lines from the bottom of the radiator.
-Remove any clamps, brackets, or screws holding the radiator inside its frame.
-Lift the radiator up and out of the car.
4. Install the new radiator:
-Slide the new radiator into place.
-Connect any clamps or brackets that hold the radiator in place.
-Connect the transmission cooling lines carefully.
-Connect the engine cooling hoses to the radiator.
-Replace the fan and fan shroud.
-Reconnect the fan electrical connection.
-Replace the plastic covers.
5. Fill the radiator with fluid.
6. Check your work to make sure that there are no leaks.
(Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)
Note: Do please keep children and pets away when replacing the radiator)
Note:
1. Project operation, the vehicle normal temperature 60 to 80 degrees.
2. Add detergent if the tank is too full can take some antifreeze.
Package:
1pc of brand new radiator