This projector is almost new with only 171 total hours of use on it. It has been fully tested and is working properly, guaranteed. It comes with its standard lens, a remote control, and its power supply. Pics are of the exact projector that you will receive.
MSRP Price: $24,999
Ebay Price: $2,399
The Panasonic PT-RZ670 1-Chip 6500 Lumen Laser Light Source DLP Projector is a lamp-free WUXGA projector that utilizes a filter-free design for 20,000 hours or more of 24/7/365 continuous and maintenance-free operation. With no lamp to replace, these projectors are designed for a more stable light output over a longer period of time. Projectors with lamps to replace may go through more frequent cycles of brightness and dimming, while the laser technology remains steady and brilliant during the same period.
- 6,000 lm brightness laser light source 1-chip DLP projector
- 10,000:1 contrast ratio
- Approximately 20,000 hours of continuous operation during normal use
- Lamp-free design allows for 24/7/365 continuous, maintenance-free operation
- Supports custom applications such as edge blending, pixel mapping, and projection on curved surfaces from any mounting position
- Detail Clarity Processor gives clarity to fine details
- System Daylight View enhances color perception, reducing the need to turn off the lights
- Full 10-bit signal processing
- Constant Brightness mode contributes to long-term applications
- Cooling system maintains quiet, long-term, stable operation while keeping the exhaust heat low
High Brightness of 6,500 lm
A new heat-resistant material is used in the phosphor wheel to withstand the high output of the laser light source. Combined with a drive system that is also optimized for the light source, this made it possible to achieve the world’s first*1 6,500 lm*2 of brightness in a 1-chip DLP™ projector. In our Quartet Color Harmonizer, optimal engineering of the color wheel mechanism has improved color reproduction by reducing energy loss from the light source. This has resulted in a perceived brightness that even exceeds the specification values, regardless of the projected content, opening the door to a wide range of applications for the PT-RZ670 and PT-RW630.
Dynamic Light Control for High 10,000:1* 4 Contrast Ratio
The PT-RZ670 Series projectors directly control the output of the laser light source itself, enabling faster response than lamp-based projectors. Frame-by-frame scene-linking modulation with complete digital control makes it possible to adjust the light output with higher precision. This gives the PT-RZ670 Series its remarkable 10,000:1*4 contrast without lowering the brightness in bright scenes. This enables highly pre-cise contrast control even when bright and dark scenes suddenly or frequently interchange. There is also almost no reduction in contrast when the projector is used for extended periods of time.
Ideal White Balance for All Picture Modes: Superior Color Reproduction.
Unique, optimal Panasonic engineering eliminated the white segment from a conventional color wheel and achieved an ideal mixture of the four R, G, B, and Y colors to give the color wheel mechanism in the PT-RZ670 Series a greatly improved white balance. This takes full advantage of the SOLID SHINE Series to produce almost pure white even in Dynamic mode (brightness 6500 lm). And in other modes as well, optimally balanced, high-definition images are projected with little loss of brightness. Color reproduction approaches the level of our high-end flagship models.
Detail Clarity Processor 3 Gives Natural Clarity to Even the Finest Details
This unique Panasonic circuit optimizes the sharpness of each image, based on the superhigh-, high-, medium-, and low frequency components of the extracted image information. The resulting images have more natural, lifelike expression.
Advanced Technologies for Excellent Image Quality
• 3D color management system
• Full 10-bit image processing
• Progressive cinema scan (3:2 pulldown)
• Dynamic sharpness control
• Digital noise reduction
• IP conversion
• AI scene control
• 2:2 pulldown mode
• sRGB compatibility
Dual Drive Laser Optical Engine for Reliable 24/7 Operation
It is almost impossible to imagine that a laser light source would suddenly go blank. The Dual Drive Laser Optical Engine uses two sets of light sources that group laser diodes into a number of modules. Based on redundant design, the laser diodes are put to considerable use, so over the long term, if a laser diode were to stop functioning, a protective circuit would activate to keep the brightness drop extremely small. Even if this were to happen during 24/7 operation, it would not result in downtime. The dual drive structure also keeps the optical engine output uniformly bright and colorful even if the light source’s original brightness is different due to aging degradation.
Long-Lasting Image Quality Featuring Constant Brightness Modes
While the brightness of a conventional lampbased projector drops rapidly due to deterioration over time, the brightness of the laser light source decreases gradually (exhibiting a linear decrease over the time of usage). The PT-RZ670 Series maintains high brightness for 20,000 hours*3 or more. In addition, built-in brightness and color sensors optimally maintain brightness and color balance with high precision, to dramatically suppress the effects of time-related deterioration. Together with a durable optical system, the PT-RZ670 Series maintains excellent picture quality for a long period of time. In many cases, this means no maintenance for about 20,000 hours.