Vgate Vlinker BM+ 100% ORIGINAL ADAPTERcompatible with 95 % + world car models

1.Professional ELM327 is perfectly compatible with Bimmer Code / Bimmer Link
2.Support Almost All ELM327 / ELM329 / OBDLINK Adapter Software
3.Support for BMW adjustment and programming
4.OBD2 Standard Protocols + More protocols
5.Fully automatic operation
6.Automatic sleep / start

Vgate Vlinker BM+ Vehicle Coverage

1. America Car List: (include Brazil)

Need standard obd2, and release from 2001 years to now

Fit for Chrysler, Fit for Ford, Fit for GM, Fit for Jeep

2. Europe Car List:

Need standard obd2 , and release from 2004 years to now.

Fit for Alfa Romeo, Fit for SAAB, Fit for Acura, Fit for Opel, Fit for Audi, Fit for Seat, Fit for Peugeot, Fit for Renault

Fit for Bentley, Fit for Skoda, Fit for Daewoo, Fit for Benz, Fit for Daihatsu, Fit for Land Rover

Fit for BMW, Fit for Vauxhall, Fit for Citroen, Fit for Volvo, Fit for Fiat, Fit for VW, Fit for Ford, Fit for Jaguar

3. Asia Car List: (include Australia)

Japanese car Need standard obd2 , and release from 2006 years to now.

Fit for KIA, Fit for Isuzu, Fit for Honda, Fit for Mitsubishi, Fit for Hyundai, Fit for Dacia, Fit for Lexus, Fit for Mazda

Fit for Nissan, Fit for Subaru, Fit for Suzuki, Fit for Toyota

Chinese car Need standard obd2 , and release from 2011 years to now

Fit for BYD, Fit for Chery, Fit for Geely, Fit for Great Wall, Fit for Karry

4. Russia Car List:

For Ssangyong Actyon , A200 XDI Diesel, from 2007 to 2017 years ; 2.4 Diesel, from 2009 to 2017 years.

For Ssangyong Korando, 2.0 TD Diesel , from 2013 to 2017 years.

For Ssangyong Kyron, 2.0 Diesel, from 2007 to 2017 years.

For Ssangyong Rexton, 2.7 XVT Diesel, 2007 years or 2011 to 2017 years,

For Ssangyong Rodius, 2.7 Diesel , 2007 to 2017 years.

For LADA Niva, 1.7 Gasoline , from 2011 to 2017 years.

For LADA Priora, 1.5 Gasoline , from 2008 to 2017 years.

If you are not sure whether it compatible with your car, please do not hesitate to contact us first,

Tell us your car model , release year, Vehicle Capacity, diesel or gasoline, 12v or 24v engine work voltage.

for example: for Audi A4, 2011 year, 2.0 TDI, Diesel, 12v.

Vgate vLinker BM+ is an adapter that is perfectly compatible with BimmerCode:

Rich instruction set, compatible with more APP software：

-- Fully compatible with ELM's AT command set;

-- Fully compatible with STN's ST command set;

--39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps.

-- Compatible with ELM and STN power management solutions.

-- Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep;

-- Support UART active, battery voltage drop, OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode.

-- Device sleep power consumption is less than 2 mA.

-- OBD request byte up to 48 bytes, can meet the needs of some special long framecommunication.

-- UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps.

-- 256-byte storage unit

-- More than 100,000 erasable times

-- Read and write operations on any unit in the storage area by using the VT command

-- Mix ID Sending" mode of CAN protocol.

-- Optional formatted send data according to protocol

-- Multiple WM sequence settings

-- Support AT command to manually set WM sequence

-- Support for specifying a protocol or a full protocol-wide temporary WM sequence

-- Support for a permanent link between a protocol and a private WM sequence

-- Secure bootloader for easy firmware updates

How to see if my vehicle is compliant with OBD II?

Easy Steps To Use Vgate vLinker BM+

1. Software installation
2. OBD Device Access
3. Use the Software
4. Connect the Phone

How to use Vgate vLinker BM+?

For Android Phone
Step 1: lnsert the adapter into the OBD interface of the car, Turn ignition to Key On Engine Off Position. Open the Bluetooth settings. Search forthe device name "vLinker BM-Android" and click Pair.

Step 2: Enter the pairing code: 1234 lf the pairing is successful, you can open the APP to set up the connection.

Note: Please select the BluetoothDevice Name "vLinker BM-Android"(Searching for Bluetooth may takesome time.)

Step 3: open the app's Settings .

Step 4: Select Adapter "vLinker Bluetooth"

Spte 5: Return to the main page of the app, click CONNECT.

For IOS Phone
Step 1: Insert the adapter into the OBD interface of the car. Turn ignition to Key On Engine Off Position. -button on the ios device and continue to the OBD app setting.

Note: Cannot see Eluetoothaename in iPhone?

Dont worry.This Device only reauire toeoaure Bluetth device name in the OBD app Settina. lustenable Bluetooth button on the los Device and continue to the obd app setting in step 2 ONLY ios supported Bluetooth profilas can show device name.

Bluetooth LE 4.0 technology isnitapply for the supported.

Step 2: open BimmerCode APP, Click Setting, Enter the Setting Menu Page.

Step 3: click Adapter.

Step 4: Select Adapter For "vLinker Bluetooth” , then click on the upper left corner return.

Step 5: Click"Done" back to the main page of the APP.

Step 6: Enter the main page click Connect

Step 7: Choose your vehicle model (eg: BMWw 7 Series...)

Step 8: wait for BimmerCode APP to communicate with the car.

Step 9: lf the communication is successful, you can select the control unit you want.

Vgate vLinker BM+ Packing List

1 x Vgate vLinker BM+ BT4.0
1 x User manual
1 x Carton box