Bench
Grinder Complete With An Add-On DIY Metal Polishing Kit
Suitable for polishing Aluminium, Steel, Stainless Steel, Alloys, Brass
** As this machine has a medium sized 250W motor it is suitable for light
polishing work only (eg golf club heads, candelabra). For more heavy type
polishing please have a look at our 375W versions in our Ebay Shop
This Kit is Supplied with our Long Version Spindle Adapters.
Please Note – The Bench Grinder and Polishing Add-On Kit are supplied
separately. The buyer needs to Assemble the Polishing Kit to the Bench
Grinder and the machine to the stand. For Assembly Instructions and Kit
Contents Please Read Below. Tools required (not supplied) are a 19mm
spanner and a Philips Screwdriver.
1 x
Draper 250W 6" Bench Grinder
230v
3000 rpm.
Electric Plug. Supplied fitted with a UK 3 Pin Electric Plug. International
buyers need to fit their own plug / adapter which is suitable for use in their
own country.
Comes fitted with
1 x 150mm Fine Grinding Wheel
1 x 150mm Medium Grinding Wheel
Please Note - the Motor will Run Hot. This is normal. The run time
is around 15 minutes on, allow to cool, then continue. Do Not Push Hard
against the polishing wheels. This will strain the motor. Using Light Pressure
with the correct polishing procedures and this will get satisfactory results
1 x
Sealey Bench Grinder Stand
Size : 465 x 465 x
900mm
Grinder Base Plate :(W x D) - 270mm x 220mm
Weight : 6.65kgs
The stand
must be securely fixed to the floor before use. Fixings are not supplied.
Assembly : The stand is supplied by Sealey as flat packed and needs to be
assembled.
Polishing Add-On Kit Contents
2 x Bench Grinder Spindle Adapters (1 x left and 1 x right)
These are used to attach polishing mops to the bench grinder.
1 x 6" x 1/2" Sisal Metal Polishing Wheel.
1 x 6" x 1/2" White Stitch Metal Polishing Wheel.
1 x 6" x 1/2" Loose Fold Polishing Wheel.
Polishing Compound Bars – Weight Approx. 100gms (vary 90gms to
105gms)– Dimensions - Approx. 85mm x 20mm x 27mm. see additional image
1 x Black Bar
1 x Green Bar
1 x White Bar
1 x Blue Bar
1 x Brown Bar
1 x
Cloth
1 x Instructions
Warranty - This bench grinder (not accessories) comes with a 1 Year Warranty from date of purchase.
Safety - When polishing using the spindle adapters attached to the bench grinder, suitable safety glasses, gloves and dust mask (not supplied) must be worn
Scratch Removal - If there are scratches in the item surface then a series of abrasive discs / pads (eg 500 to 2000 Grit) may need to be used first prior to the polishing process.
Assembly - The Polishing Kit is supplied separately to the Bench Grinder and needs to be assembled / attached by the following method.
Spindle Adapter Fitting
Once the bench grinder side guards and the grinding wheels have been removed (please note that the left hand grinder shaft has a left hand nut), the mop spindle adapters are then slid over the grinder shafts. There is a right hand and a left hand spindle adapter in the kit. Please remove the grub screws in the adapters first and then fit the adapters as far as they will go onto the shaft. Once fitted, reinsert the grub screws (one in each adapter) and tighten them using your allen key (not supplied)
Shipping
To - Northern Ireland, Channel Islands, Isle of Man, Isle of
Wight, and certain Scotland Post Codes (including some Aberdeenshire Post
Codes) as can be seen listed below -
Please
Note. The Free Post
and Packaging to the above areas does not apply to this
listing as the carriers charge a premium to deliver to those areas. Please
kindly contact us for shipping rates which will be charged extra,
prior to making your purchase.
UK
Shipping
UK Areas and Post Codes Where Free Shipping Is Not Offered. Please
contact us for shipping rates.
- Northern Ireland
- Isle Of Man
- Isle Of Wight
- Channel Islands
- And the following Scotland Post Codes
AB31 to AB38
AB40 to AB56
HS
IV1 to IV28
IV30 to IV32
IV36 to IV40
IV41 to IV49
IV51, IV55 & IV56
IV52 to IV54
IV63
KA27 and KA28
KW1 to KW14
KW17 to KW17
PA20
PA41 to PA49
PA21 to PA38
PA60 to PA78
PH4 to PH41
PH41 to PH42
PH49 to PH50
ZE
* Large Parcels
We send by overnight carrier and the consignment tracking number is uploaded to
the buyer’s Ebay account. Please make sure there is somebody available to
receive and sign for the consignment. The carrier will only attempt to deliver
twice and if there is nobody there on both occasions the receiver will then
have to collect from their local depot within 5 days.
International
Shipping
We ship to eligible countries using Ebay’s Global Shipping Programme. Further
details can be viewed at http://pages.ebay.co.uk/help/buy/shipping-globally.htm